user login

ZAX - GS TYPEAIR JET LOOM Mechanical / Electronic Rolling Air Jet Loom Machine

Place of Origin: Zhejiang

Company Profile

Location: Hangzhou, Zhejiang, China (Mainland)
Business Type: Manufacturer
Main Products: High Speed Rapier Loom, Flexible Rapier Loom, Air Jet Loom

Product Detail

Model No.: ZAX-GS

Product Description

ZAX-GS TYPEAIR JET LOOM Mechanical/Electronic Rolling Air Jet Loom Machine

 

Specifications:

 

Weave navigation system:The ZAX-GS expands and enhances automatic setting fuctions for more detailed and easier operation.Enter a minimum number of items.Conditions to control weaving are set automatically,and our recommended mechanical values are shown.In the operation of the loom can also monitor the condition and provide appropriate suggestions according to the need ,navigate loom into optimum working state.

 

Weave navi:the Weave Navi monitors loom operation while the loom is in operation. It gives advice to improve the operation to various situations ,navigating you to the best weaving conditions.

 

Tune Navigation : the best setting values are automatically entered for your fabric and loom specifications . Automatic setting for the warp tension is available in addition to the conventional automatic setting function for weft insertion . optimum mechanical settings are recommended for the tension roll position , easing amount and various pressure settings according to the fabrics to be woven.

 

PDP-AIII free drum pooling system:The ZAX-GS entirely adopts this new FDP-AIII Free Drum Pooling System in response to the demands for faster operation and wider applicable range of wefts.the advancing reel system is standard and separates weft yarns positively.

 

Driving-rush start motor:the rush start system can delivers high-power torque at starting,enabling increased beating power for first pick,eliminating stop marks ,and contributing to high quality production.

 

top-mounted temple:a guide bar is arranged close to the cloth fell, between the assembled sets of temples and temple cases on both sides of the fabric. It stabilizes the cloth fell position for spun fabrics in general ,improving the quality . moreover ,sub-nozzles can be fixed freely beneath the guide bar , resulting in wider weaving versatility.

 

3-eyed feeler:the 3-eyed feeler, a reflective sensor ,detects any colored spun and filament yarns ensuring stable filling insertion .this feeler does not require a special reed whose overall length is determined according to the reeding width .

 

Independent 2/2 selvage:this independent shedding motion is applied for the formation of tucked selvage or selvage for denim fabric . thus, the load on the main shedding can be reduced , contributing to higher speed operation and energy savings .

 

APR-C(Automatic defective pick remover):in case of mis-insertion of the filling , the APR-C automatically reverses the loom , removes the defective pick , and restarts the loom by computer control .it is a powerful device for full-automation , labor savings ,and upgrading of product quality.

 

PSC programmable speed control:up to eight kinds of loom RPM can be independently set . formerly , the loom RPM was restricted by some kinds of weft yarns . when using multiple kinds of wefts including difficult yarn , the programmable speed control automatically increases the loom RPM except for the section using the difficult yarn . it changes the RPM within 1 pick . this increases productivity.

Item Specification Opion
reedspace(cm) nominal useful reeding width 190,210,230,280,340,360,390
0~-60cm(190-250cm)
same as nominal width maximum reduction
0-80cm
0~-80cm

weavable range
spun:Ne100-Ne2.5
filament:56dtex-1350dtex

filling selection
2-color mixing,2-color at will,4colors,6colors

driving

direct start of rush-start motor drive

PSC programmable speed control

PSC programmable start

push-button operation with both hands
motor capacity 2.7Kw,3.0kw,3.7kw,5.5kw
jacquard shedding

filling insertion
main and sub-nozzles combined system,
profile reed,
auxiliary main nozzle
strech nozzle

wbs weft brake system

FIC fuzzy insertion control

main nozzle clamper

filling insertion control
new solenoid valve with built-in manifolds

independent sub-nozzle timing control by color

sub-nozzle boosting system

AJC auto jet controller,first pick control
2000m/min

shedding
crank plain shedding:shaft number:4
auto-leveling(positive cam),shaft number up to 10
positive cam shedding:shaft number up to 8
negative cam shedding:shaft number up to 8
dobby shedding(electronic,positive,floor-mounted):shaft number up to 16
jacquard shedding

let-off

Electronic let-off

twin beam

with kick
Post Buying Request