HG50 Tube Mill Equipment
| Min. Order: | 1 Set/Sets |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | L/C, D/P, D/A, T/T |
| Supply Ability: | 999 |
| Place of Origin: | Hebei |
Company Profile
| Location: | Shijiazhuang, Hebei, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | HG165 Tube Mill Equipment, HG50 Tube Mill Equipment, HG76 Tube Mill Equipment, Tube Mill/pipe Mill/tube Making Mill, HG60 Tube Mill Equipment |
Product Detail
| Model No.: | Φ12.7mm-Φ50mm |
|---|---|
| Means of Transport: | Ocean |
| tube making mill: | pipe making mill |
| Production Capacity: | 999 |
| Packing: | seaworthy packing |
| Delivery Date: | 80 days after receipt of 30% down payment. |
Product Description
I. Summary
The mill is intended for manufacturing of round pipe of Φ12.7mm-Φ50mm with thickness of 0.8mm–3.0mm from cold-rolled and hot-The mill is intended for manufacturing of round pipe of Φ12.7mm-Φ50mm with thickness of 0.8mm–3.0mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
Finished product will be of round, square or rectangular pipe. rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
Finished product will be of round, square or rectangular pipe.
II. The technical flow of the production line
{SteelTape}→→ Double-head un-coiler →→Strip-head Cutter and welder→→
Spiral accumulator→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ Removing External and internal burr →→Eddy Current Tester→→Zinc Painting Machine→→Cooling unit →→ Sizing unit and straightener →→Flying saw under computer-control →→ Run-out table
III. Basic conditions:
a) Steel Pipe Specification
1. Pipe diameter: Ø12.7–Ø50mm
Pipe Thickness: 0.8– 3.0mm
2. Square Pipe: 10X10mm –40X40mm
Rectangle Pipe: 10X20mm –30X50mm
Pipe Thickness: 0.8 – 2.0mm
3. Pipe Length: 6-9m
4. Length Tolerance: 0-6mm
b) SteelTape Specification
1. Material: Low Carbon steel (δb≤500Mpa, δs≤235Mpa)
2. Steel Tape: Inner diameter: Φ510-Φ610mm
Outer diameter: Φ900-1500mm
Strip steel width: 40mm-160mm
Strip steel thickness: 0.8mm-3.0mm
The maximum weight: 3.0 tons
c) Electricity
1. Dynamic power: AC380V±10%, 3phases, 50Hz±1.0%
2. Control Power: AC220V±10%, one phase, 50Hz ±1.0%
d) Electric installed capacity: appro. 450KW
e) Cooling water
1. Reservoir for High Frequency equipment: 15 m³, one set
2. Reservoir for circulating cooling water: 15 m³, one set
f) Compressed air
1. Pressure: 0.4Mpa
2. Flow: 0.5m3/h
g) Production capacity
Annual output: 10000 ton, according to the yearly working days,daily working hours and the products.
h) Line speed: 30-90m/min
