user login

Plastic Precision Injection Mould LKM Base For Micro Eyelash Brush

Place of Origin: Zhejiang

Company Profile

Location: Shenzhen, Guangdong, China (Mainland)
Business Type: Manufacturer
Main Products: Plastic Injection Mould, Hot Runner Injection Mould, Cold Runner Mold

Product Detail

Model No.: SY-09017

Product Description

 

 

Plastic Precision Injection Mould LKM Base For Micro Eyelash Brush

 

 

Quick Detail:

 

1. The part name: Micro eyelash brush(plastic injection mold)

2. Plastic material: PA

3. Cavity material: H13 HRC48-52

4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

5. Gate type: Edge-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.

6. Mold base standard: LKM Local standard, DME or HASCO, Customize according to customers' requirements.

7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.

 

 

Description:

 

The part name: Micro eyelash brush

Mold type: Plastic Injection Mould with cold runner system

Part Material: PA

Locating ring Dimension: 100

KO Pattern: 200*200

Sprue Radius: SR 19

Ejection type: ejection pins.

Mold construction description: cold runner system with edge gate, 2 plates, 2sliders, and many micros inserts and shut off area. Many size tolerances are no more than +/-0.02mm. the brush bristles each line must have a insert for cut cavity steel and be helpful to mold venting,the diameter of the brush bristles is 0.3mm,which is very difficult to cut steel.

 

This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport, Sliver Marks, Gas Trap Effect, Visible Ejector Marks,Deformation,Short shot Filling, Burnt Streaks, Sink Marks,Flash,Over dimension, Under dimension, Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE A-2.

 

This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.

 

 

Applications:

 

Molding the plastic product by plastic injection machine

 

 

Specifications:

 

Post Buying Request

1.name

Micro eyelash brush(plastic injection mold)

Plastic material

PA,PP,PE,PA,PC,ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF,

POM+GF,PA+GF,PPT,PET,PETG,SEBS etc.

3.mould base material

S50C,P20,S136 etc

4.cavity material

H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc

5.mold life

1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

6.cavity number

8

7.runner

Cold runner

8.gate type

Edge-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.

9.mould weight

350 kg

10. mould base standard

LKM Local standard, DME,HASCO,Customize according to customers' requirements

11.cycle time

 26 second