Wire Harness Tape 5079 and 5079RV

Wire Harness Tape 5079 and 5079RV

Technical Data Sheet

July 2013

Supersedes 3M Beta Tape 5079 technical data sheet dated June 2004

General Description

3M Wire Harness Tape 5079 is a double-sided acrylic foam sealing tape with excellent initial adhesion, heat resistance and durability compared to conventional butyl sealing tape. Common uses include bonding to rough or highly irregular surfaces, sealing and other applications where a highly conformable tape is required. 3M Wire Harness Tape 5079 has been developed using the technology of 3M Acrylic Foam Tape, which has been used for vehicle interior and exterior part attachment for more than forty years.

3M Wire Harness Tape 5079 offers the following features, advantages and benefits:

•

Demonstrates excellent initial adhesion and static performance against substrates that have uneven surfaces

•

Can be applied to many substrates used for automotive parts, often without special surface treatment

•

Exhibits good workability due to high tape modulus, ease of cutting and wet-out

•

Helps reduce the possibility of staining the bonded surfaces because it is made of a high molecular weight acrylic material

•

Excels in extreme weather, heat and solvent resistance

Alternative Scrim Options

3M Wire Harness Tape 5079 is also available as 3M™ Wire Harness Tape 5079RV, which contains a scrim close to the yellow paper liner.

Applications

3M Wire Harness Tape 5079 is used in the attachment of wire harness assemblies to automobile headliners, attaching interior trim, bonding impact relaxation pads to door panels, bonding of cellular urethane, polystyrene and polypropelene parts and similar applications.

Product Construction

5079

Yellow paper liner

Pressure sensitive acrylic foam adhesive

Scrim

5079RV

Yellow paper liner

Scrim

Pressure sensitive acrylic foam adhesive

Physical Properties

Tape No.

5079, 5079RV

Color

Black

Thickness

2.0 mm (0.08 in)

Shelf Life

One year from the date of receipt by customer when stored at 4ºC-38ºC(40ºF-100ºF) and 0-95% relative humidity. Optimum storage conditions are 22ºC (72ºF) and 50% relative humidity.

Roll Width and Length

Please contact a 3M representative to learn about availability of roll widths and lengths.

Technical Data Sheet

3M Wire Harness Tape 5079 and 5079RV

Page 2

Performance Properties

Performance tests are run using standard test procedures in 3M laboratories. These values presented are typical and not to be used for specification purposes. Peel values depend on test conditions and substrates.

180° Peel Strength

The tape is peeled off at a 180° angle and the adhesion to the substrate is measured with a tensile strength test machine after exposing the tape to the following conditions:

Test Conditions

Substrate

5079/5079RV (N/cm)

Butyl Tape

Initial state

23°C for 24 hours

Painted steel

18.0

7.8

EPDM*

18.0

5.9

Normal state

23°C for 24 hours

Painted steel

18.0

7.8

EPDM*

18.0

5.9

High temperature

80°C for 24 hours

Painted steel

8.0

0.4

EPDM*

8.0

0.4

Heat aging

80°C for 14 days

Painted steel

23.5

9.8

EPDM*

21.0

5.9

Warm water immersion

40°C for 14 days

Painted steel

23.0

10.8

EPDM*

21.0

5.9

Wax remover immersion

1 hour

Painted steel

18.0

6.8

EPDM*

18.0

4.9

* Adhesion promoter was applied to the EPDM surface.

90° Peel Strength

Adhesion to Painted Steel

Test Conditions

Temperature

5079/5079RV (N/cm)

Butyl Tape

Immediate state

30 seconds after tape lamination

5°C

14.0

4.9

23°C

23.1

7.8

40°C

23.1

7.8

Static Shear

Static shear tests are run with 10 mm wide x 25 mm long tape. EPDM is applied to painted steel and exposed to the tested temperature for 24 hours.

Temperature

5079/5079RV (k/Pa)

Butyl Tape

23°C

500.0

100.0

40°C

400.0

50.0

60°C

300.0

10.0

80°C

100.0

0.0

Precautionary Information

Please refer to the product label and SDS for health and safety information before using.

Contact Information

The information provided in this technical document is intended as a guide for this product. For more information or help in selecting a 3M product for an application, please contact your 3M technical service representative or call 1-800-328-1684.

Technical Data Sheet

3M™ Wire Harness Tape 5079 and 5079RV

Page 3

Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.

Product Use: Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the use and performance of a 3M product in a particular application Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application.

Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.