AWS A5.5 / ASME SFA5.5 E7018-A1

S-7018.A1        AWS A5.5 / ASME SFA5.5 E7018-A1

TYPE : Basic      JIS Z3223 E4918-1M3

                                   EN 1599 - E Mo B 3 2

Applications

S-7018.A1 can be used for welding of 0.5%Mo heat resistant steel used for high temperature and high pressure boilers, chemical industries, oil refining industries and turbine casting. Other general low alloy steel and high tensile steel.     

Characteristics on Usage

S-7018.A1 is an iron powder low hydrogen type electrode. Its coating contains much iron powder, which increasing working efficiency.        

Notes on Usage

① Dry the electrodes at 350~400℃(662~752℉) for 60 minutes before use.

② Preheat at 100~200℃(212~392℉) and postheat at 620~680℃(1148~1256℉).

③ Keep the arc as short as possible.                

Welding Position                                 Current

        AC or DC +

     1G        2F       3G        4G

    (PA)       (PB)      (PF)      (PE)                              

Typical Chemical Composition of All-Weld Metal (%)

Typical Mechanical Properties of All-Weld Metal                              

Approval                           I Packing

                                          Packet 5 ㎏ (11 lbs)

                                          Carton 5 ㎏ (11 lbs)×4 : 20㎏(44 lbs)

Sizes Available and Recommended Currents (Amp.)

Size mm (in)    2.6 (3/32)   3.2 (1/8)   4.0 (5/32)   5.0 (3/16)   6.0 (15/64)

Length mm(in)  350 (14)    350 (14)   400 (16)    400 (16)    450 (18)

F             55~90      90~130   130~185    190~250    250~300

V-up, OH      50~80      80~120   120~170       -          -