W-210A is a line array system which is made of two 10" neodymium woofers, two 2" titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required, a W-210A will integrate seamlessly with W-250A line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-210A is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields.
DESCRIPTION and APPLICATION
W-250A is dedicated high performance sub-bass system designed to augment the low frequency output of the W-210A, W-250A is a sub-bass enclosure which must be flown with W-210A. So its physical dimensions are identical to the W-210A and it is equipped with the same proprietary rigging system. It features with twin 15" neodymium woofers with magnet structure and suspensions engineered for maximum linear excursion.
Model | W-210A/W-250A |
Type | Line array system |
Line array sub-bass system(W-250A) |
Frequency Response | 60Hz-20KHz±3dB |
40Hz-150Hz±3dB(W-250A) |
Power handling | LF 600W(RMS)1200W(PEAK) |
HF 160W(RMS)320W(PEAK) |
1200W(RMS)2400W(PEAK)(W-250A) |
Sensitivity | LF 99dB(1W@1M) |
HF 108dB(1W@1M) |
112dB(1W@1M)(W-250A) |
Max@S.P.L | LF 127dB(PEAK/1M) |
HF 127dB(PEAK/1M) |
143dB(PEAK/1M)(W-250A) |
LF section | 2×10"(260mm) neodymium woofer |
75mm(3in)coil |
Components | 2×15"(380mm) woofers |
100mm(4in)coil(W-250A) |
Nominal impedance | 16 ohm |
4 ohm(W-250A) |
HF section | 2×2"neodymium compression driver |
with 51mm titanium diaphragm |
Nominal impedance | 16 ohm |
Output section | 2-channel |
Dispersion pattern | 110°H×9°V |
Finish | Water-proof,wear-resistant textured black paint |
Array design | Arrays of less than 3×W-210A will |
provide poor dispersion control and |
are neither recommended nor supported |
Speaker cables | LF 1(+)1(-) HF 2(+)2(-) |
1(+)1(-) (W-250A) |
Rigging system | Please refer to the W-210A user |
manual before any operation |
Input connectors | 2×NL4MP speakon |
Recommend crossover | LF 70Hz-2kHz |
HF 2kHz-20KHz |
35Hz-120Hz(W-250A) |
Dimensions | 855×293×600mm(W×H×D) |
855×440×820mm(W×H×D)(W-250A) |
Package dimensions | 925×360×670mm/0.22cbm |
925×510×890mm/0.42cbm(W-250A) |
Enclosure | Birch plywood |
Net weight | 42kg (W-210A)/ 72kg (W-250A) |
Gross weight | 45kg (W-210A)/ 76kg (W-250A) |