FIN Residual current circuit breaker

Min. Order:	1 Set/Sets
Trade Term:	FOB,CFR,CIF,EXW
Payment Terms:	Paypal, L/C, T/T, WU
Supply Ability:	100000
Place of Origin:	Yunnan

Company Profile

Yunnan Nanyue Electric Power Equipment Co., Ltd.

Location:	Kunming, Yunnan, China (Mainland)
Business Type:	Manufacturer

Product Detail

Means of Transport:	Ocean, Land
Brand Name:	Nanyue
Production Capacity:	100000
Packing:	Export Standard package
Delivery Date:	Delivery in 5 work days after payment

Show

Product Description

Application

Residual Current Device(RCD) FIN is in conformity with the standard of IEC61008.It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line.Thus it is suitable to avoid the shock hazard and fire caused by earth leakage.
FIN ELCB is mainly suitable for using in varieties of plants,enterprises,buildings,constructions, commerce,guesthouses and families.It can be used in circuits of 1 phase 230V and 3 phase 400V 50/60Hz.

▲Specifications

Number of poles	2P,4P
Rated current (A)	16,20,25,32,40,50,63
Rated residual operating current(I△n)(mA)	30,100,300,500
Rated residual non-operating current(I△no)(mA)	≤0.5I△n
Rated voltage (V)	AC230/240
Residual current off-time	≤0.1S
Short circuit capacity (Icu)	3000A
Endurance	≥4000
Protection Degree	IP20

▲Operation principle

Overall and mounting dimensions(unit:mm)

Normal operation and mounting requirement
Circumstace temperature-5℃~+ 40℃,average temperature not exceeding 35℃. Altitude above sea level less than 2000m. Humidity not exceeding 50% at 40℃ and not exceeding 90% at 25℃. Installation classⅡ or Ⅲ. Pollution class Ⅱ. Installtion method DIN Rail mounting type. The external magnetism shall not be more than 5 times of terrestrial one. Product shall be installed vertically at the place where there shall be no severe impact and vibration.The product is switched on when the handle is at upper position.

Normal operation and mounting requirement

Circumstace temperature-5℃~+ 40℃,average temperature not exceeding 35℃.
Altitude above sea level less than 2000m.
Humidity not exceeding 50% at 40℃ and not exceeding 90% at 25℃.
Installation classⅡ or Ⅲ.
Pollution class Ⅱ.
Installtion method DIN Rail mounting type.
The external magnetism shall not be more than 5 times of terrestrial one.
Product shall be installed vertically at the place where there shall be no severe impact and vibration.The product is
switched on when the handle is at upper position.