Ring Type Joints(RTJ) Gaskets in Ningbo Rilson

RTJ Ring Type Joints

Metallic ring type joint gaskets are heavy duty, high-pressure gaskets largely used in offshore and onshore petrochemical applications. They are precision-engineered components designed to be used in conjunction with precision-machined flanges. All our Ring Joints are manufactured according to ASME B16.20 and API 6A.

The gasket material is selected on a number of grounds primarily; chemical compatibility with the media and the hardness of the flange. The gasket material ideally needs to be roughly 30 Brinell less than the flange material to ensure sufficient deformation of the gasket without damaging the flange facing.

Worn, pitted or corroded flange sealing surfaces can impede the sealing ability of RTJ gaskets. In such instances, a serrated octagonal RTJ gasket, covered with flexible graphite, can provide a temporary or emergency solution until the flange can be repaired or replaced.

The sealing surfaces on the ring joint grooves must be smoothly finished to 63 Microinches and be free of objectionable ridges, tool or chatter marks.

A number of ring joint styles are available designed for specific flange types, these are:

Style R Oval

Size/Pressure Class:

½" to 24" : 150 to 2500 ASME B16.20

26" to 36" : 300 to 900 ASME B16.47 Series A

1 ½" to 20" : API 6A

Applications:

• Used for high pressure applications.

Typical Properties:

• High integrity seal at high pressures

• Suitable for flat and round bottom groove flanges. Interchangeable on modern octagonal type grooved flanges.

Style R Octagonal

Size/Pressure Class:

½" to 24" " 150 to 2500 ASME B16.20

26" to 36" : 300 to 900 ASME B16.47 Series A

1 ½" to 20" : API 6A

Applications:

• Used for high pressure applications.

Typical Properties:

• High integrity seal at high pressures

• The octagonal cross section has a higher sealing efficiency than the oval and would be the preferred gasket

• Suitable for flat bottom groove flanges

Style RX

Size/Pressure Class:

1 ½" to 20" : 720 to 5000 API 6A

Applications:

• Used for high pressure applications.

• The Style RX is designed to fit the same groove design as a standard style R making joints interchangeable

• The Style RX has an increased height and utilizes the internal system pressure to energize and improve the seal as internal pressure increase

• Suitable for flat bottom groove flanges

Style BX

Size/Pressure Class:

1 11/16" to 30" : 2000 to 20000 API 6A

Applications:

• The Style BX energised ring type joint is manufactured in accordance with API 6A for use in high pressures.

• Style BX ring type joints incorporate a pressure passage hole to allow for pressure equalization each side of the sealing faces.

• Style BX is not interchangeable with any other style, and is only suited for API 6BX flanges.

Common Material of RTJ

Soft Iron, Low Carbon Steel, 4–6% Chrome 1/2% Moly, Type 304 Stainless Steel, Type 316 Stainless Steel, Type 347 Stainless Steel, Type 410 Stainless Steel, Titanium Grade 2, Alloy 600, Alloy 625, Alloy 800, Alloy 825, Hastelloy, Alloy C276, SMO 254, Zeron 100, Super Duplex

why choose us? 

1)world class gasket 
2)standard/no standard gasket 
3)genuine products with excellent quality 
4)after sales service and technical assistance: 
Rilson provide after sales service as the customer's requirement and needs. 
5)quick delivery: 
Rilson provides just-in-time delivery with its steamlined supply chain. 
6)less cost of purchase: 
Rilson is a direct importer and agent of manufacturers around global, so there are no intermediary costs involved. 

If you are interested in our products, please contact me in Ali and in Email and I will reply to you as soon as possible.

My target of service is to satisfy your requirements.

My Email: sales02@rilson.com.cn

Your success is my business.