11KW Automatic Shrink Wrap Machine
| Place of Origin: | Jiangsu |
|---|
Company Profile
| Location: | Suzhou, Jiangsu, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Cold Pilger Mill |
Product Detail
| Model No.: | G800 |
|---|
Product Description
11KW Automatic Shrink Wrap Machine , Heat Shrink Tubing Machine
G400 shrinking machine for making pipe before done in drawing machine
Quick Detail:
1. Type: pipe-shrinking machine
2. Model Number: G800
3. Used in: G800 pipe-shrinking machine is for making pipe before drawing machine,the material can be any metal.G400 pipe-shrinking machinecan roll pipe diameter of 16--40mm to 10--35mm.
The technical parameters:
Operating Instructions:
| No. | Name | Technical Parameters | Unit |
| 1 |
Range of Reduction for Diameter |
10 ~ 35 | mm |
| 2 | Diameter of Mother Tube | 16 ~ 40 | mm |
| 3 |
Time for one reduction |
4 ~ 6 | s |
| 4 | Motor | 11 | kw |
| 5 | System pressure | 52 | Mpa |
| 6 | Machine Size | 900*1150*1310 | mm |
| 7 | Machine weight | 1750 | kg |
G400 pipe-shrinking machine operations and processes
1. Take out the mould by rotating it according to arrow direction, no reverse rotation allowed.
2. Moulds can be changed according to different specifications.
3. Head length can be adjusted by middle adjusting rod, loose the belt wheel screw, adjust the length and fasted the screw again.
4. Pour in 80% diesel and 20% engine oil, as the oil pump capacity is big, oil box entrance valve should be fully open, machine valve fix a little oil is ok.
5. After the umbrella-block wear down and the gap becomes big, you can put a gasket between umbrella block and the mould, but the gasket can not be too thick so that machine won't get stuck.
6. The lubrication oil should be changed after it gets dirty.
Safety Precautions
1,Place the machine on a fixed horizontal surface and the calibration level, the machine is stable.
2,Check the oil leve
.jpg)
