CW 1171 caledonian telephone cables

APPLICATION

The cables are designed for use as subscriber distribution cables and as connection between central offices in local access networks. The cables are unfilled and capable of being pressurized when installed. The cables are suitable for installation in ducts.

STANDARDS

• CW 1171 (For unscreened cable)

• CW 1179 (For screened cable)

• CW 1252 (For self-supporting cable)

  ConductorsSolid annealed bare copper, 0.32/0.4/0.5/0.63/0.9mm as per BS 6360/IEC 60228 Class 1.InsulationSolid polyethylene as per BS EN 50290-2-23/BS 6234/IEC 60708.Twisted PairsInsulated conductors are twisted into pairs with varying lay length to minimize crosstalk.Cabling ElementTwisted Pairs.Cable Core AssemblyCables with 100 pairs or less are composed of 25-pair units or 12/13-pair units; cables with over 100 pairs are composed of 25, 50 or 100-pair units. Standard construction is per CW 1171 given in Cable Make Up Chart.Core WrappingOne or more non-hygroscopic polyester tapes are helically or longitudinally laid with an overlap. These tapes furnish thermal, mechanical as well as high dielectric protection between shielding and individual conductors.Moisture Barrier (optional)A layer of aluminium tape (0.15mm) coated with PE-copolymer on one or both sides is applied longitudinally with overlap over the cable core to provide shielding coverage and ensure a barrier against water vapor.SheathBlack low density polyethylene as per BS 6234/IEC 60708, being able to withstand exposure to sunlight, temperature variations, ground chemicals and other environmental contaminants.RipcordRipcord may be provided for slitting the sheath longitudinally to facilitate its removal.Spare Pairs (optional)Spare pairs may be incorporated for 200 and larger pair cables.Continuity Wire (optional)Tinned copper drain wire may be longitudinally laid to ensure electrical continuity of the screen.