5ft 25W IP65 Waterproof Linear T8 Led Tube

Product name:5ft 25W IP65 Waterproof Linear T8 Led Tube

Model:ZS-T8W-2835

---IP65 T8 Led Tube Light

Features:

• IP rating: IP65

• Led chip: Epistar SMD2835

• Built-in isolated driver

• Warranty: 2 years

---IP65 T8 Led Tube Light

General specifications:

Render Index: 72Ra

Beam Angle: 145°

Color Temperature: 3000K/4000K/6000K

Material: AL6063+PC

Working Temperature: -40~65℃

Input Voltage: AC100~240V

Power Efficiency: 86%

Power Factor: 0.95

THD: < 14%

Output Accuracy: < 3%

PFC

Dimension:

 ---dimension of IP65 T8 Led Tube Light

Dimensions:

Color Parameters:

---day light of IP65 T8 Led Tube Light

Day Light :

X=0.3266 Y=0.3415 Tc=5600K-6200K

Dominant WL:=508.4nm Purity=2.1%

Centroid WL:549nm

Ratio:R=14.1% G=83.0% B=2.9%

Peak WL:Lp=445.0nm HWL:22.4nm

Render Index:Ra=72.5

natural white of IP65 T8 Led Tube Light

Neutral White:

X=0.3768 Y=0.3864 Tc=3800K-4500K

Dominant WL:=575.6nm Purity=29%

Centroid WL:569nm

Ratio:R=17.5% G=80.3% B=2.2%

Peak WL:Lp=450.0nm HWL:20.8nm

Render Index:Ra=72.7

warm white of IP65 T8 Led Tube Light

Warm white

X=0.4402 Y=0.4170 Tc=2850K-3050K

Dominant WL:=581.1nm Purity=57.3%

Centroid WL:590nm

Ratio:R=22.5% G=76.1% B=1.4%

Peak WL:Lp=590.0nm HWL:135.7nm

Render Index:Ra=72.3

Optical Parameters:

(All the figures are tested by the tube of daylight (6000K)

Illuminance Diagram:

Illuminance Diagram of 1500mm IP65 T8 Led Tube Light at 6000K

LED waterproof tube lights, with IP67 rating, can protect the tubes from dust, water and corrosion. Thus it can guarantee a longer lifespan to the whole set of LED Tube light. LED waterproof tube can be widely used in outdoor lighting, humid environment, such as refrigerator, different farms, underground parking lot.

• Super bright LED tube with waterproof function;

• Own designed internal isolated driver.

• Constant current power supply.

• Lower lumen depreciation.

• IP67 protection rating;

• ≥32000 hours life span;

• 2 years warranty

Connection:

—Connection Guidance

Waterproof LED tube adopts Male-Female joint, there are 5 steps to finish the connection.

Step1: Turn off power, then connect the Male end of tube 1 s to AC power.

Step2: Match the Female end of tube 1 to the Male end of tube 2.

Step3: Tighten the Female end of tube 1 to Male end of tube 2.

Step4: install the tubes as above description till the last tube. 

Step5: Install waterproof plug to the Female end of the last tube. Then turn on the power.

---Series of Cascading Series of cascading means the maximum tubes wire can bear to cascade.

Remark:

1. One 200mm Male-end wire and a 200mm Female-end wire will be offered to a waterproof tube as our standard configuration. For a longer length, please give an illustration when making an order and it is not included in our standard quotation.

2. One 1000mm Male-end and Female-end wire can be provided to for optional in the case client has waterproof tubes in stock. But it is not included in our standard quotation.  

Installation Instruction:

Three ways will be provided to customers for choice.

—Horizontal wire installation

Accessory: clip, nut, screw, plastic plug, horizontal steel wire set.

Picture:

---horizontal wire installation of IP65 T8 Led Tube Light

Accessory:

---accessory of horizontal wire installation

Step 1: Drill one hole and hammer the plastic plug into each wall. Then install horizontal steel wire-1 into wall.

Step 2: Drill one hole and hammer plastic plug into the ceiling. Then fix the horizontal steel wire set-2 on the ceiling by screw and nut.

Step 3: Insert waterproof tube to horizontal steel wire

Step 4: Install clips to waterproof tube

Step 5: Install waterproof tubes as connection guidance described.

—Vertical chain installation

Accessory: clip, nut, screw, plastic plug, vertical steel wire set.

Picture:

---Vertical chain installation of IP65 T8 Led Tube Light

Accessory:

---Accessory of Vertical chain installation

Step 1: Drill one hole, then hammer the plastic plug into the ceilling.

Step 2.:Drill one hole and hammer plastic plug into the ceiling.Then fix the horizontal steel wire set-2 on the ceilling by screw and nut.

Step 3: Install the clip on vertical steel wire set-2 by nut.

Step 4: Insert waterproof tube to clip

Step5: Install waterproof tubes as connection guidance described.  

—Wall installation

Accessory: clips, nut, screw, iron plate, plastic plug.

Step1: Fix the cilp to the middle hole in the iron plate by crew and nut.

Step2: Drill 2 holes on the wall according to the position of rest 2 holes in the iron plate. Then hammer the plastic plug into ceilling.

Step3: Put the screws into the rest 2 holes in the iron plate and then hammer the screws into plastic plug.

Step4: Insert waterproof tube to clip.

Step5: Install waterproof tubes as connection guidance described.  

Suggestion: 2~4 clips should be installed for each tube to ensure the stablity of waterproof tube. Specific information is as below.

Packaging: