Welded Steel Wire Mesh Reinforcement SGS Manufacturer

Welded Steel Wire Mesh Reinforcement SGS Manufacturer 

1. Introduction:

2.

 Steel mesh reinforcement  is netted welded steel reinforcement product. The longitudinal and transverse reinforcing steel bar is arranged with a certain distance at right angles to each other.

Material: cold-rolled ribbed bar/ cold-drawing round bar steel/hot rolled ribbed steel.

the cold-rolled ribbed bar is widely used.

wire diameter: 4mm-14mm

hole size: 150mm x 150mm;200mm x 200mm:200mm x 250mm;250mm x 250mm:300mm x 300mm.

customized is available.

panel width:  1-2.2m

panel length: 2-11.8m

making way: welded.

Advantage:

Replaces traditional steel-cutting and fixing on-site 

Reduces reliance on site labour and site congestion

Improves buildability and productivity.

Applications:

1. Concrete footpaths

2. Precast Panel construction

3. Construction reinforcement

4. Residential slabs and footings

5. Industrial and commercial ground slabs

Features:

It has a strong and firm body, can bear the high pressure from the concrete and exterior. The reinforcing mesh can save much man-haur, reduce the material cost in the process. 

The reinforcing mesh can design by the project requirement, improve the efficiency and bond to the concrete can meet the special construct needs. It is widely use in airport, tunnel, bridge, highway and wharf, also in the construction of building floor, wall, roof and balcony.

 Steel mesh reinforcement can reduce the installation time. With dense spacing of reinforcing steel bars, longitudinal bar and transverse bar will form into a netted texture for anchoring bond. This can prevent the emergence and development of concrete cracks. Concrete surface cracks can be reduced about 75% if reinforcing mesh is installed on pavement, terrace and floor.

2.Types of the  Steel mesh reinforcement :

 (1).Rectangular Welded Mesh with wires crossed in a form of a rectangle, and longitudinal wire as the supporting one;

 (2).Square opening welded Steel mesh reinforcement with wires crossed in a form of a square, and both longitudinal and transversal wires as supporting ones;

      Welded reinforcement Wire Mesh for vertical wall building;

(3). Steel mesh reinforcement can all be used in concrete reinforcing. Concrete is one of the more common materials used in the construction of commercial buildings. Its properties make concrete an excellent choice for steel structures, cladding systems and floor slabs on grade.

 Although concrete is an excellent building material and is extremely strong in compression, it has one limitation - concrete is weak in tension. By combining concrete with material that is strong in tension, we can create a composite that greatly reinforced.

(4).Concrete Steel mesh reinforcement consists of pieces of wire or rebar welded together to form a grid pattern. The size of the grid pattern is typically 4-inch-by-4-inch up to 8-inch-by-8-inch. This type of reinforcement is used to minimize shrinkage cracking in the surface of the concrete.

3.Application:

Welded steel bar panels are widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body.
We can process by customer's requirement

Haotian Hardware Wire Mesh Products Company 
Add: Heping Road,Anping county, Hebei,China