Place of Origin: | Zhejiang |
---|
Location: | Wenzhou, Zhejiang, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Model No.: | NPS 2-48 |
---|
Low Torque Electrical API 6FA Trunnion Ball Valve For Gas Industry , CRN CE
Quick Detail:
Size & Pressure : 150# DN50-DN1200
300# DN50-DN1200
600# DN50-DN1200
900# DN50-DN900
1500# DN50-DN600
2500# DN25-DN300
Description:
FORGED TRUNNION BALL VALVE
1.Forged ball valve feature
OVIKO forged ball valve,the forging material can ensure sufficient rigidity and strength under
maximum rated operation pressure without inherent flaw of cast. Enough wall thikness of separate
body and adaptation of high strength tie bolts are convenient for valve maintenance and sufficient
to bear the stress of pipe.The internal parts of valve are carefully designed and selected to ensure
reliability under all kinds of work condition.
2.Anti-fire safe design
When the trunnion ball valve be used normally,its sealed by seat and ball surface,seat retainer
sealed by O-ring and body,this is soft sealed and reliable sealing.When the seat and O-ring are
burnt,the seat retainer and body will be sealed by expanded graphite.Thus act anti-fire safe purpose.
3.Anti-static device
In order to prevent friction among ball,stem and PTFE that generates static electricity which may
light the combustibles and explosives that cause an accident,in this ball valve,static-conduction spring
is set between the stem and the ball,the stem and the body.Thus static electricity is conducted to
ground and system safety is secured.
4.Free leakage of body Sealed construction
The connective position of valve body and bonnet is double sealed by gasket and O-ring,on this
base,such factors as fire,high temperature,shock and uneven opening or closing of the torque all
can't induce external leakage.
5.Low torque in operation
The self-lubricated bearings are installed at the friction of stem,resulting in wear resistance,fiexibility
of operation and low torque.
6. Double block&bleed(DBB)
When ball is full open or close position,the transmitter substance in center cavity of body can be
released by drainage and emptying devices.In addition,the over loaded pressure in the center
cavity of valve can be released to low pressure end by self relief seat.
7.Emergency sealing
Compound injection holes are designed and compound injection valves are installed at locations of
stem/cap and body support of side valve.When sealing of stem or seat is damaged to induce leakage,
the compound can be used to do the second time sealing.A concealed check valve is installed in side
of each compound injection valve to prevent compound from out flowing due to the action of
transmitter substance.The top of the compound injection valve is the connector for fast connection
with compound injection gun.
8.Extension stem
You Might Also Like