Culvert Pipe Making Roll Forming Machine 1.0 - 6.0 x 1600mm Steel Metal Galvanized 18 Forming Statio

Culvert Pipe Making Roll Forming Machine 1.0 - 6.0 x 1600mm Steel Metal Galvanized 18 Forming Stations

Technical parameters:

1. application:  HRS, CRS
2. coil weight : 15 T
3. width of coil material:  1600mm
4. coil I.D:  508-760
5. coil O.D:  950-1800mm
6. line speed :0-50m/min
7. width of slit strips:  6mm-39mm
8. the diameter of slitting blade shaft: 200 material :40Cr
9. slitting blade: φ200Xφ380X15
10. material of slitting blade: 9CrSi
11. the hardness of slitting blade: HRC58°-60°
12. recoiler I.D of scrap winder: φ420
13. recoiler I.D: φ508
14. tolerance of width error: ≤±0.05mm/2M
15. other parameters: power:380V/50Hz/3Ph

                   area of the whole machine:30m(L)x6m(W)

                   operator needed: 1 technician and 2 general workers

                   weight of the whole machine: 40T

Composed devices

1. Hydraulic coil car
2. Hydraulic decoiler
3. Hydraulic press and guide and pinch device
4. hydraulic head-cutting machine
5. guide device
6. Slitting machine
7. roller table
8. scrap winder
9. hydraulic damping and pre-dividing and press device
10. recoiler
11. hydraulic unload car
12. electric control system
13. hydraulic system