5 Ribs Covered 1000mm PU Sandwich Panel Production Line With Double-Belt Conveyor

Place of Origin:	Guangdong

Model No.:	AIA-1

Rock Wool/Glass Wool/PU Sandwich Panel Production Line

With Double-Belt Conveyor

Introduction of machine

A combination production line,wich can produce PU,rock wool,glass wool sandwich panels,with the function of edge foaming and sealing for rockwool,glass wool panels.
High pressure glue spraying unit:glue is sprayed on up and down steels sheet directly,wich saves glue and insures quality by maximing the stickness of glue.
Rotary type:block type,two turning.It is the most advanced and reliable technology,suitable for producing low density glass wool panels.
Picture of production line

NO.		Composing of product line	Amount
1	Panel Roll Forming Machine	main roll forming machine	1
		De-coiler for 1040mm in width	1
2	Panel Roll Forming Machine	main roll forming machine(double layer)	1
		De-coiler for 1200mm in width	1
3	PU Sandwich Production Line	PU two component Liquid mixing and injecting section for foaming	1
		Panel automatically cutting system	1
		PU solidify conveyor system	1

Primary technology parameters of PU sandwich panel product line

Production Material(mm):(0.25-1.0)×L, yield strength≤G300 Colored steel
Production speed:4-8 M/min
Production type: totally continuous production with PLC controlling
PU foam thickness: 25-100mm
Composite structure:position fixed by double rubber tracker
Foaming system: totally automatically continuous foaming, quantity of foaming could be stepless adjustable
Power of production ≥ 22KW
Total power ≥ 35 KW
Cutting:pneumatic piston driving, non-stop cutting via sliding table
Electronic controlling system: full-frequency PLC controlling system

Uncoiler roll forming machine

Excellent groove design and forming technics of roll forming machine combine with aided design of German copre software which can release whole stress and reduce waves while roll forming and keep the final products with planeness.
Two-side projecting shaft roll former,rollers can be fixed on two sides shafts.
Fast vertical loading of roll forming stations
Roll forming machine on two side can be bidirectional changed,matched with double-belt conveyor to keep center.
Width adjusting device by using high-precision ball screw and linear guide,accuracy tolerance+/-0.5mm.
Pre-heating room is made of 50mm PU Sandwich panel as fence,which decreases heat-loss substantially.

PU Sandwich foaming line

Two sets of conveyor rack: up conveyor is about 24m, down conveyor is about 30m.They lead the steel sheet from the roll forming machine to preheating room and to foaming,to cutting.
One preheating room: It is built by heat-insulation material, and it could heat up the steel sheet to 25-38 by heater.
One set of PU two component Liquid mixing and injecting section for foaming : it adopt Chinese high pressure pump. It have the temperature control system and material-level monitoring system. The tank of the material is about 150L. Two tanks.
Foaming and double rubber device include motor driver system to make panel.
The width of belt board is 1250mm, the range of adjusting distance between upper and lower frame belt board: min 25mm, max 200mm. And the range of adjusting thickness of sandwich panel :30mm,50mm,100mm.(30-50 for celling , 50-100 for wall)

Double-belt conveyor

Contact Supplier