Industrial 150HP 8 bars stationary direct type rotary screw air compressor

Industrial 150HP 8 bars stationary direct type rotary screw air compressor

Main machine is from the company named LOFTOLL in Germany. Our technology is using the third era non-symmetry tooth-model rotor in 5:6, the distance between rotor we keep in 0.003 inch, it will have no abrasion for ever, the fall in tooth of rotor is very small, cost of circumfluence is small, then it will be in higher effort than 4:6 about 10-20%, reduce electricity about20%. We use SKF bearing from Sweden, which prolong the life of main machine. Our machine can work continuously in 24 hours

Motor: Y-starter; Voltage 380V; Frequency 50Hz; Protection Ip-54; Insulation Class F

Filter:  We choose LOFTOLL from Germany, specially designed, can be used more than 4000 hours, it is easy for maintains and change.

Oil-filter: We choose LOFTOLL from Germany, filtration density is 10μm, it can filtrate 99.9% impurity from oil, in order to protect compressor and bearing. It can be used more than 4000 hours.

Air-Oil separator: We choose LOFTOLL from Germany, after separator, the oil is under 3ppm, to ensure the quality of air.

Control system:  All parts are from Schneider in France, using full intelligent computer control. Easy, steady for customers.
 

Introduction: Full-automatically load and unload, control the input air full automatically, compressor will start when there is no pressure automatically, and will stop working when the pressure is full in air tank, when the compressor is short of electric ,the electric is in reverse, the pressure is too high, the temperature is too high, it can protect itself full-automatically. You can use our compressor without any workers on duty.

Specifications: