GJXH-2 Optical fiber Cable
| Payment Terms: | T/T |
|---|---|
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Service |
| Main Products: | Electronic |
Product Detail
| Model No.: | GJXH-2 |
|---|---|
| Means of Transport: | Ocean, Land |
| Mode field diameter (1310nm): | 9.2mm±0.4mm |
| Mode field diameter (1550nm): | 10.4mm±0.8mm |
| Cladding diameter: | 125mm±1.0mm |
| Coating diameter: | 245mm±7mm |
| Cut off wavelength of cabled fiber (lcc): | 1260nm |
| Attenuation at 1310nm: | 0.35dB/km |
| Attenuation at 1550nm: | 0.21dB/km |
| Bending loss at 1550nm (100 turns, 30mm radius): | 0.05dB |
| Dispersion in the range 1288 to 1339nm: | 3.5ps/(nm•km) |
| Dispersion at 1550nm: | 18ps/(nm•km) |
Product Description
1. Cable cross-section
2. Cable Specification
2.1 Introduction
This flat drop cable, which consists of 1, 2, or 4 color coded optical fibers, offers an ideal solution for the smaller fiber counts that are needed in the final sections of an optical network. Two parallel steel strength members protect the optical fibers. The cable is completed with a LSOH jacket
2.2 Cable structure and parameter
SN | Item | Unit | Value |
1 | No. of fibers | count | 2 |
2 | sheath material/color | LSZH/Black | |
3 | Fibers Color | Blue, Orange, Green, Brown | |
4 | Strength member | Steel strength member | |
5 | Cable diameter | mm | 3*2 |
6 | Cable weight | kg/km | 13 |
7 | Short term tension | N | 200 |
8 | Short term crush | N/100mm | 2200 |
Note: Mechanical sizes are nominal values.
3. Characteristic of Optical Cable
Mechanicalcharacteristic and test method | |||
Tensilestrength | conform to IEC 794-1-E1 | ||
Crush | conform to IEC 794-1-E3 | ||
Impact | conform to IEC 794-1-E4 | ||
Repeatedbending | conform to IEC 794-1-E6 | ||
Torsion | conform to IEC 794-1-E7 | ||
Flexing | conform to IEC 794-1-E8 | ||
Cablebend | conform to IEC 794-1-E11 | ||
Waterpenetration | conform to IEC 794-1-F5B | ||
Temperaturerequirement | Operation | - 20℃ ~ +60℃ | |
Installation | - 20℃ ~ +60℃ | ||
Storage/transportation | - 20℃ ~ +60℃ | ||
Temperaturecycling test | conform to IEC 794-1-F1 | ||
BendingRadius | unloaded | 30times of outer diameter | |
loaded | 60times of outer diameter | ||
4. Characteristic of Optical Fiber
G652D fiber information
| Mode field diameter (1310nm) | 9.2mm±0.4mm |
| Mode fielddiameter (1550nm): | 10.4mm±0.8mm |
| Claddingdiameter: | 125mm±1.0mm |
| Coatingdiameter: | 245mm±7mm |
| Cut offwavelength of cabled fiber (lcc): | £1260nm |
| Attenuationat 1310nm: | £0.35dB/km |
| Attenuationat 1550nm: | £0.21dB/km |
| Bending loss at 1550nm (100 turns, 30mm radius): | £0.05dB |
| Dispersion inthe range 1288 to 1339nm: | £3.5ps/(nm•km) |
| Dispersion at1550nm: | £18ps/(nm•km) |
| Dispersionslope at zero dispersion wavelength: | £0.092ps/(nm2•km) |
.jpg)
.jpg)