Arduino Module Analog AD 5-Key Keyboard Module , Electronic Building Block
| Place of Origin: | Guangdong |
|---|
Company Profile
| Location: | Shenzhen, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Arduino Starter Kits |
Product Detail
| Model No.: | Electronic building blocks |
|---|
Product Description
Arduino Module Analog AD Keyboard Module , Electronic Building Block
Electronic building blocks AD Keyboard Analog keyboard module
Description:
|
Color |
Black + yellow |
|
Material |
PCB + plastic |
|
Features |
5 keys in one analog port; Durable Omron buttons with different voltages; Compatible with forArduino sensor interface; With 3 I/O PIN ports: VCC, GND, OUT. |
|
Specification |
Analog 5-key keyboard module for Arduino power electric building block |
|
Application |
Analog keyboard module for Arduino power electric building block |
|
English Manual/Spec |
No |
|
Packing List |
1 x AD keyboard module |
Use an analog port to read the five key states for Arduino save IO port. With Arduino sensor expansion board can be completed and buttons of interactive works.
Aruino test code:
/ / ADKeyboard Module
int adc_key_val [5] = {50, 200, 400, 600, 800};
int NUM_KEYS = 5;
int adc_key_in;
int key = -1;
int oldkey = -1;
void setup ()
{
pinMode (13, OUTPUT); / / we'll use the debug LED to output a heartbeat
Serial.begin (9600); / / 9600 bps
}
void loop ()
{
adc_key_in = analogRead (0); / / read the value from the sensor
digitalWrite (13, LOW);
key = get_key (adc_key_in); / / convert into key press
if (key! = oldkey) / / if keypress is detected
{
delay (50); / / wait for debounce time
adc_key_in = analogRead (0); / / read the value from the sensor
key = get_key (adc_key_in); / / convert into key press
if (key! = oldkey)
{
oldkey = key;
if (key> = 0) {
digitalWrite (13, HIGH);
switch (key)
{
case 0: Serial.println ("S1 OK");
break;
case 1: Serial.println ("S2 OK");
break;
case 2: Serial.println ("S3 OK");
break;
case 3: Serial.println ("S4 OK");
break;
case 4: Serial.println ("S5 OK");
break;
}
}
}
}
delay (100);
}
/ / Convert ADC value to key number
int get_key (unsigned int input)
{
int k;
for (k = 0; k <NUM_KEYS; k + +)