Surface mount potentiometer DB06NP

Surface mount potentiometer

Debon Electorinics are leadingpotentiometer supplier in china.we are specializing in producing and developingpotentiometers,Encoders,Swithes for many years.With the customers of Behringer,Edifier,Haier,etc.Withcompetive price and high qualiy.

thumbwheel Potentiometer specification: 

1.Low-profile and good reeling.

2.Dip and reflow solderable.

Electronics characteristics:

TotalResistance:Single Unit:500Ω-500KΩ;

TotalResistance tolerance:+/-20%; Resistance Taper: A.B.C.D ect

Max.OperatingVoltage:DC 10V ;

RatedPowe(Single/Dual Unit)r:Taper B:0.04W/0.02W ;Other Tapers:0.02W/0.01W

Rotationalnoise: less than 100mV

ResidualResistance: Term.1~2:less than 20 Ω ;Term.2~3: less than 20Ω

Withstandvoltage:10 Sec at AC 25V

InsulationResitance:Over 5MΩ at DC 25V

Mechanical characteristics:

TotalRotational Angle:Single Unit:270°C+/-10°C;Dual Unit:120°C+/-10°C

RotationalTorque:5gfNaN~90gfNaN

RotationalStopper Strength:0.7KgfNaN Min

Push-PullStrength:Push:0.5kgf min;

Pull:0.2kgfmin;

Debonpotentiometers are rarely used to directly control significant power (more thana watt), since the power dissipated in the potentiometer would be comparable tothe power in the controlled load (see infinite switch). Instead they are usedto adjust the level of analog signals (e.g. volume controls on audio), and ascontrol inputs for electronic circuits. For example, a light dimmer uses apotentiometer to control the switching of a TRIAC and so indirectly control thebrightness of lamps.A potentiometer informally, a pot, is a three-terminalresistor with a sliding contact that forms an adjustable voltage divider. Ifonly two terminals are used (one side and the wiper), it acts as a variableresistor or rheostat. Potentiometers are commonly used to control electricaldevices such as volume controls on audio equipment. Potentiometers operated bya mechanism can be used as position transducers, for example, in a joystick.