High quality rotary potentiometer

potentiometer

Debon Electorinics are leading potentiometer supplier in china.we are specializing in producing and developing potentiometers,Encoders,Swithes for many years.With the customers ofBehringer,Edifier,Haier,etc.With competive price and high qualiy.

potentiometer specification:

1.Metal shaft style

2.Carbon element.

3.Wide range of resistance tapers

4.Asorted pin layout

4.Defetive rate≤1‰; Rotation(sliding) life ≥10000 cycles

Electronics characteristics:

Total Resistance:Single Unit:500Ω-1MΩ;

Total Resistance tolerance:+/-20%; Resistance Taper: A.B.C.D ect

Max.Operating Voltage:Linear Taper B:AC500V ;Other Tapers:AC 250V ;

Rated Power:Linear Taper B:0.5W ;Other Tapers:0.25W ;

Sliding noise: less than 100mV

Insultated Resistance: More than 10OMΩ at DC 500V)

Withstand Voltage:1 min at AC 500V ;

Residual Resistance: Term.1~2:less than 10 Ω ;Term.2~3: less than 10Ω

Mechanical characteristics:

Total Rotational Angle:300°C+/-10°C

Rotational Torque:30gf.cm~150gf.cm

Stopper Strength:5.0Kgf.cm Min

Push-Pull Strength:10.0kgf min

Debon potentiometers are rarely used to directly control significant power (more than a watt), since the power dissipated in the potentiometer would be comparable to the power in the controlled load (see infinite switch). Instead they are used to adjust the level of analog signals (e.g. volume controls on audio), and as control inputs for electronic circuits. For example, a light dimmer uses a potentiometer to control the switching of a TRIAC and so indirectly control the brightness of lamps.A potentiometer informally, a pot, is a three-terminal resistor with a sliding contact that forms an adjustable voltage divider. If only two terminals are used (one side and the wiper), it acts as a variable resistor or rheostat. Potentiometers are commonly used to control electrical devices such as volume controls on audio equipment. Potentiometers operated by a mechanism can be used as position transducers, for example, in a joystick.