GPU/VGA Water cooling water block for Graphic card

 Model: SC-VG69T

Support platform:GTX690 graphics core, memory, power supply, cooling,

Material: copper

Surface treatment: The environment-friendly electroplating process,

Connector: G1/4-8 fast twist

Technology:

Adopt skving technology, which take away the maximum heat from the heat source;

Ultra-low water resistance design and intensive parallel channel can absorb heat more effectively;

Advanced sealing technology avoid leak effectively and more reliable used;

Die-casting one time safer

Application: Best used with the appropriate kits of syscooling

Easy to install and operate:

First of all, it is ready to install the equipment, tear up the graphics on the back of the protective film.

Use a screwdriver to remove the original fan graphics, remove the original screws packed several placed for use on the graphics card in the future after-sales maintenance.

Graphics memory and power supply module, paste the thermal paste, should be at the core of the thermal grease wipe off and re-painting factory standard thermal grease. (Note that the thermal grease applied evenly, must not be applied too thick, too thick it will affect the cooling capacity)

The syscooling SC-VG69T Graphics cold head installed on the graphics card, try to install the graphics card with the cold head alignment pitch to prevent lead thermally conductive paste on the graphics card installation backplane screw dislocation, affecting the cooling effect.

Finally, then screw on the graphics backplane, then the catheter sleeve soaked in hot water for a period of time after the softened on the outer ring of the water-cooled joint, the catheter is fixed in the elbow can.