TPR Cold Runner Plastic Injection Tooling For Elastic / Banana Gate
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Dongguan, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Plastic Injection Mould |
Product Detail
| Model No.: | SY-10086 |
|---|
Product Description
TPR Cold Runner Plastic Injection Tooling For Elastic / Banana Gate
Quick Detail:
1. The part name: Elastic plastic (plastic injection mold)
Plastic material: TPR (elastic plastic)
2. Cavity material: H13 HRC48-52
3. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
4. Gate type: banana gate according to our customers requires.
5. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements
6. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: Elastic plastic
Mold type: plastic injection mold
Part Material: TPR(elastic plastic)
Locating ring Dimension: 3.99",
KO Pattern: 7”x7”,
Sprue Radius: SR 1/2"
Ejection type: stripper plate and ejection pin.
Mold construction description: cold runner system with banana gate, 2 plates, 2 sliders, stripper plate.
This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE B-2.
This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Specifications:
|
1.name |
Elastic plastic (plastic injection mold) |
|
2.Plastic material |
TPR |
|
3.mould base material |
S50C |
|
4.cavity material |
H13 HRC48-52, 136H, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
2 |
|
7.runner |
Cold runner |
|
8.gate type |
Banana gate according to our customers requires. |
|
9.mould weight |
270 kg |
|
10. mould base standard |
LKM Local standard, DME or HASCO,Customize according to customers' requirements |
|
11.cycle time |
30second |
|
12. standard of mold accessories |
LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires. |
|
13.design software |
Auto CAD ,UG, Pro-E ,Solid Works,moldflow,etc. |