Cold Runner Injection Mould Parts

Cold Runner Plastic Injection Mould Parts For Bushing / PP

Quick Detail:

1. The part name: bushing  (plastic injection mold)

2. Plastic material: PP

3. Cavity material: H13 HRC48-52

4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

5. Gate type: Cold runner to SUB gate according to our customers requires.

6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements

7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.

Description:

The part name: bushing

Mold type: plastic injection mold

Part Material: PP

Locating ring Dimension: 3.99",

KO Pattern: 7”x7”,

Sprue Radius: SR 1/2"

Ejection type: ejection pin.

Mold construction description: Cold runner system, 2 plates, this product is very thin wall thickness only 0.2mm, the mold have 0.02mm concentricity requires for these holes, so that is a very precise mold.

This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE B-2.

This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.

Specifications:

1.name	bushing  (plastic injection mold)
2.Plastic material	PP
3.mould base material	S50C
4.cavity material	H13 HRC48-52, 136H, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc
5.mold life	1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
6.cavity number	1
7.runner	Cold runner
8.gate type	Cold runner to SUB gate according to our customers requires.
9.mould weight	180 kg
10. mould base standard	LKM Local standard, DME or HASCO,Customize according to customers' requirements
11.cycle time	10second
12. standard of mold accessories	LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
13.design software	Auto CAD ,UG, Pro-E ,Solid Works,moldflow,etc.
You Might Also Like Plastic injection mould part maker with high precision plastic mould . injection mould . mould manufacturer. auto parts Injection Mould Parts Plastic Injection Mould of automotive parts-steering wheel mould Advanced injection mould for plastic parts of T-shape brush Plastic Injection Motorcycle parts mould Cooling System Mould, Plastic Injection Mold Parts For Household Appliance Related Searches: Runner Mould Hot Runner Mould Injection Mould Diesel Fuel Injection Parts Plastic Injection Mould Injection Plastic Mould Bumper Injection Mould Injection Mould For Plastic Chair Plastic Injection Mould Plastic Crate Injection Mould Show Post Buying Request Contact Supplier Sign In | Join Free About - Feedback -Terms - Privacy - Desktop View Copyright @ HiSupplier.com, All Rights Reserved