Digital Voice Concrete Test Hammer. This new and advanced model of digital concrete hammer microprocessor operated consists of the standard unit similar to the model HT225-A but equipped with an electronic transducer which converts the rebound of the hammer into an electric signal and displays it in the selected stress unit. The digital hammer, which is battery operated, can be easily connected to a PC or serial printer via the RS 232 port. A large permanent memory can store up to 48000 results. Supplied complete with battery charger and serial cable.
Specifications:
Measuring strength ranges: 10-60 Mpa
Impact energy: 2.207 Nm
Strike hammer stroke: 75 mm
The consistency of the sample
Displayed values: ± 0.5(difference value
Between digital sampling output value and the pointer readings)
Measurement range from 10 to 70N/mm2
The rebound values calibrated on steel anvil: 80± 2
Display: 16-bit true color, 176× 220 resolution, 5 grades backlight adjustment
Power: 3.6V/1300mAH recharging lithium battery, charging
P owe r a d a p t e r 5 V / 2 A.
Maximum backlight, turn off speech cases, it can be continuous work 13 hours.
Power consumption appox: 100 mA (Voice off) Maximum backlight situation
Communication interface: USB2.0 full-speed
Gross weight approx: 4.5 Kg
skype=chinesemoulds(at)hotmail
| Measuring strength ranges: | 10-60MPa |
| Normal impact energy: | 2.207J(0.225Kgf.m) |
| Strike hammer stroke: | 75mm |
| The friction force of pointer slider: | 0.5N±0.8N |
| Spherical radius of strike rod : | 25mm±1mm |
| The rebound values calibrated on steel anvil: | 80±2 Dimensions: Φ54*278mm |
