1000W Solar Grid tied inverter DC10.5-28V AC220V/AC110V

Easy operation:Direct feed the solar panel(10.5V to 28V) to your national grid network to supply the loads which lower your electricity bill.

In order to achieve higher power use requirements, this product can be stacked, such as: 4 grid inverter1000W stacking can achieve 4000W.

System Function:                                            

1,directly connected to the solar panels (do not need to connect the battery)

2,AC 0 angle with high precision auto-detection
---Synchronous High-frequency Modulation

3,Automatic Sensing Function Solar Luminosity

---Power Automatically Locked (APL)

---Maximum Power Point Tracking (MPPT)

---Automatically Adapt To Different Load Power Factor

4,Constant Current, Constant Power

5,Automatically Shut Down When The Power Output Of a Fault
---Current Limit Protection

6,Stack Multiple Machines

7,High-Frequency High Conversion Rate

Input and output
1\DC input limit
---Input voltage range: 10.5V to 28V
---Solar Panel: Recommend using the power more than 30W and the standard voltage of 17.5V PV panel.
---Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter.
---Wind turbine system: Rated voltage 24VDC, maximum voltage 28VDC.
2\AC output:
---Voltage range of the inverter whose output is 220V AC.: 180V - 260V
---Voltage range of the inverter whose output is 110V AC.: 90V - 140V

LED Indicator:

Notes                                                              
---Please pay attention of the voltage when use the product. The voltage is from 10.5—28V, if is not these voltage the product may broken.
---Non-professionals do not disassemble. Only qualified personnel may repair this product.
---Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials.
---When using this product, avoid children touching, playing, to avoid electric shock.
---Recommended Maximum DC input 4AWG cable capable of handling more than 50A of the
cable size.
---Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter
DC voltage drop caused by wear and tear.
---Connected to a power outlet to provide AC.
---Connected solar panels, battery DC input power supply cable.

1\Red LED:
---Low-voltage protection (input DC voltage is less than 10.5VDC).
---Over-voltage protection (Input DC voltage is greater than 28.5VDC).
---Over-temperature protection (when the chassis temperature is above 75℃, the temperature dropped about 2-10 minutes to restart automatically after cooling).
---Fault Protection (when 110VAC or 220VAC power outage or shutdown).
---Islanding protection: When the electric supply stop, the inverter automatically shut down output.
2\Green LED:
---Green LED flashing: The inverter is adjusting power output. MPPT is in working condition.
---Green LED long in time: The inverter is in working condition with the maximum output power.

Accessories for product
One standard AC wire
One user manual

Ms Rita Wang   

Skype: powerelek
sales(at)snatenergy(.)com

snatenergy(at)hotmail(.)com

Welcome to visit our offical Online shopping platform www(.)snatenergy(.)com for more information.

Your China Solar off grid and on grid power system Center for Workshop, Wholesale, DIY, Drop-ship.