FAG cylindrical roller bearing 130*230*40mm

 FAG NU226-E-M1 cylindrical roller bearing 130*230*40mm

Product details:

FAG NU226-E-M1 Cylindrical roller bearing 130*230*40mm
Specifications:Type: Cylindrical roller bearing
Lubrication: Oil or GreaseDimensions: 130mmX230mmX40mm
ID (inner diameter)/Bore: 130mm
OD (outer diameter):230mm
Width/Height/thickness:40mm
Dynamic load rating Cr: 42.5KN
Static load rating Cor: 44.5KN
Material:Chrome steel,Carbon steel, Stainless steel
Lmiting Speed: 3500 R/M
Reference Speed:2850 R/M
Weight: 6.50 kg
Package: wooden boxes , carton boxes ,plastic tubes or as you requiredFeatures

Features:

Single row cylindrical roller bearings with cage are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling.

The cage type bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs. Bearings with the suffix E have a higher capacity roller set and are thus designed for very high load carrying capacity.

The bearings are separable and are therefore easier to fit and dismantle. Both bearing rings can be given a tight fit by this process.

Single row cylindrical roller bearings with cage are available as non-locating, semi-locating and locating bearings.

Numerous sizes are supplied in the X-life grade. These bearings are indicated in the dimension tables.

Bearings of X-life quality have, for example, lower roughness Ra and higher geometrical accuracy of the raceways than comparable designs that are not X-life. As a result, these bearings have higher load carrying capacity and longer life for the same dimensioning.
In certain applications, this means that a smaller bearing arrangement can be designed.

Cylindrical roller bearings NU and N are non-locating bearings and can support radial forces only. In series NU, the outer ring has two ribs, while the inner ring has no ribs. Bearings N have two ribs on the inner ring and an outer ring without ribs.

Cylindrical roller bearings NJ are semi-locating bearings. Semi-locating bearings can support not only high radial forces but also axial forces in one direction and can therefore guide shafts axially in one direction. They act as non-locating bearings in the opposite direction. The bearings have two ribs on the outer ring and one rib on the inner ring.

Non-locating bearings NU can be combined with an L-section ring HJ to form a semi-locating bearing unit. They must not be installed with two L-section rings (due to the risk of jamming).

Cylindrical roller bearings NUP and NJ with HJ are locating bearings. They can support not only high radial forces but also axial forces in both directions and can therefore guide shafts axially in both directions

Type NUP has two ribs on the outer ring and one rigid rib on the inner ring. A loose rib washer is fitted on the opposite side..

Non-locating bearings NJ can be combined with an L-section ring HJ to form a locating bearing unit. This design has two ribs on the outer ring, one rib on the inner ring and an L-section ring for the ribless side of the inner ring. The L-section rings suitable for the bearings are indicated in the dimension tables. The bearing and L-section ring must be ordered separately.

L-section rings are advantageous where, under high loads, the seating surface of the inner ring in NUP bearings with a loose rib washer is too small to provide a sufficiently high bearing seat. In some applications, they make it easier to fit and dismantle the bearings.Application: cylindrical roller bearing will working application: Cable Stranders,Worm gear, Screw Drives, Turbine engine mainshafts, Transmissions, large-size generators, machine tool spindles, axle boxes,bent axles of diesel engines, gearboxes, Mechanical presses, Electrical motors, Pumps and compressors, Traction motors for railway vehiches, Axle boxes for railway vehicles, Steel mills, And so on.

Advantage

1 Roller and raceway contact or repair off the assembly line for the line contact, radial load capacity for heavy duty and shock loading.
2 The friction coefficient is small for high-speed, speed limit near the deep groove ball bearings.
3. N-type and NU-axial movement can be, able to adapt due to thermal expansion or installation error of shaft and housing caused by the relative position changes, can be used for supporting the free end
4 Detachable inner or outer ring, easy installation and removal

Application:
cylindrical roller bearing will working application: Cable Stranders,Worm gear, Screw Drives, Turbine engine mainshafts, Transmissions, large-size generators, machine tool spindles, axle boxes,bent axles of diesel engines, gearboxes, Mechanical presses, Electrical motors, Pumps and compressors, Traction motors for railway vehiches, Axle boxes for railway vehicles, Steel mills, And so on.     

Bearing series and cage materia   

Suffixes for available designs