Deep Groove Ball Bearing 6000 Series

1. Bearing Material
High carbon chrome bearing steel(Gcr15) is the standard material for bearing ring & rolling elements, also carbon steel & stainless steel will be used upon request. The cages are pressed steel ribbon cages & pressed steel snap cages. For extra-high speed application, synthetic-resin, stainless steel, nylons(Phenolic resins) will be used upon request.
2. Lubrication
Different types of greases can be supplied for shielded & sealed bearings and oil for open bearings
3. Tolerance
YUTONG Bearings can meet tolerance grades from ABEC-1 to ABEC-3 as requested dimension tolerance & runout accurancy.
NOTE
C2 Group clearance only for bearings over ABEC-3 accurancy.
4. Vibration and Noise
The vibration and noise of bearing in four classes Z1, Z2, Z3 and Z4, It is measured by the instrument of S09-1, For special requirement, it is measured by BVT-1 and classified as V1, V2, and V3, The date are shown tables, different vibration & noise requirement should be menrioned in order.

Specification
The detailed specification is as follows:

Boundary dimensions(mm)				Basic load ratings(kN)		Limiting speeds(rpm)		Mass(Kg)	Bearing Number
d	D	B	rs min	Cr	Cor	Grease	Oil	(Approx.)	YUTONG
10	26	8	0.3	4.55	1.96	29,000	34,000	0.019	6000
12	28	8	0.3	5.1	2.39	26,000	30,000	0.021	6001
15	32	9	0.3	5.6	2.83	22,000	26,000	0.03	6002
17	35	10	0.3	6.8	3.35	20,000	24,000	0.039	6003
20	42	12	0.6	9.4	5.05	18,000	21,000	0.069	6004
25	47	12	0.6	10.1	5.85	15,000	18,000	0.08	6005
30	55	13	1	13.2	8.3	13,000	15,000	0.116	6006
35	62	14	1	16	10.3	12,000	14,000	0.155	6007
40	68	15	1	16.8	11.5	10,000	12,000	0.19	6008
45	75	16	1	21	15.1	9,200	11,000	0.237	6009
50	80	16	1	21.8	16.6	8,400	9,800	0.261	6010
55	90	18	1.1	28.3	21.2	7,700	9,000	0.388	6011
60	95	18	1.1	29.5	23.2	7,000	8,300	0.414	6012
65	100	18	1.1	30.5	25.2	6,500	7,700	0.421	6013
70	110	20	1.1	38	31	6,100	7,100	0.604	6014
75	115	20	1.1	39.5	33.5	5,700	6,700	0.649	6015
80	125	22	1.1	47.5	40	5,300	6,200	0.854	6016
85	130	22	1.1	49.5	43	5,000	5,900	0.89	6017
90	140	24	1.5	58	49.5	4,700	5,600	1.02	6018
95	145	24	1.5	60.5	54	4,500	5,300	1.08	6019
100	150	24	1.5	60	54	4,200	5,000	1.15	6020
105	160	26	2	72.5	65.5	4,000	4,700	1.59	6021
110	170	28	2	82	73	3,800	4,500	1.96	6022
120	180	28	2	85	79.5	3,500	4,100	2.07	6024
130	200	33	2	106	101	3,200	3,800	3.16	6026
140	210	33	2	110	109	3,000	3,500	3.35	6028
150	225	35	2.1	126	126	2,800	3,200	4.08	6030
160	240	38	2.1	143	144	2,600	3,000	5.05	6032
170	260	42	2.1	168	172	2,400	2,800	6.76	6034
180	280	46	2.1	189	199	2,300	2,700	8.8	6036
190	290	46	2.1	197	215	2,100	2,500	9.18	6038
200	310	51	2.1	218	243	2,000	2,400	11.9	6040