Deep Groove Ball Bearing 6200 Series

1. Bearing Material
High carbon chrome bearing steel(Gcr15) is the standard material for bearing ring & rolling elements, also carbon steel & stainless steel will be used upon request. The cages are pressed steel ribbon cages & pressed steel snap cages. For extra-high speed application, synthetic-resin, stainless steel, nylons(Phenolic resins) will be used upon request.
2. Lubrication
Different types of greases can be supplied for shielded & sealed bearings and oil for open bearings
3. Tolerance
YUTONG Bearings can meet tolerance grades from ABEC-1 to ABEC-3 as requested dimension tolerance & runout accurancy.
NOTE
C2 Group clearance only for bearings over ABEC-3 accurancy.
4. Vibration and Noise
The vibration and noise of bearing in four classes Z1, Z2, Z3 and Z4, It is measured by the instrument of S09-1, For special requirement, it is measured by BVT-1 and classified as V1, V2, and V3, The date are shown tables, different vibration & noise requirement should be menrioned in order.

Specification
The detailed specification is as follows:

Boundary dimensions(mm)				Basic load ratings(kN)		Limiting speeds(rpm)		Mass(Kg)	Bearing Number
d	D	B	rs min	Cr	Cor	Grease	Oil	(Approx.)	YUTONG
10	30	9	0.6	5.1	2.39	25,000	30,000	0.032	6200
12	32	10	0.6	6.1	2.75	22,000	26,000	0.037	6201
15	35	11	0.6	7.75	3.6	19,000	23,000	0.045	6202
17	40	12	0.6	9.6	4.6	18,000	21,000	0.066	6203
20	47	14	1	12.8	6.65	16,000	18,000	0.106	6204
25	52	15	1	14	7.85	13,000	15,000	0.128	6205
30	62	16	1	19.5	11.3	11,000	13,000	0.199	6206
35	72	17	1.1	25.7	15.3	9,800	11,000	0.288	6207
40	80	18	1.1	29.1	17.8	8,700	10,000	0.366	6208
45	85	19	1.1	32.5	20.4	7,800	9,200	0.398	6209
50	90	20	1.1	35	23.2	7,100	8,300	0.454	6210
55	100	21	1.5	43.5	29.2	6,400	7,600	0.601	6211
60	110	22	1.5	52.5	36	6,000	7,000	0.783	6212
65	120	23	1.5	57.5	40	5,500	6,500	0.99	6213
70	125	24	1.5	62	44	5,100	6,000	1.07	6214
75	130	25	1.5	66	49.5	4,800	5,600	1.18	6215
80	140	26	2	72.5	53	4,500	5,300	1.4	6216
85	150	28	2	83.5	64	4,200	5,000	1.79	6217
90	160	30	2	96	71.5	4,000	4,700	2.15	6218
95	170	32	2.1	109	82	3,700	4,400	2.62	6219
100	180	34	2.1	122	93	3,500	4,200	3.14	6220
105	190	36	2.1	133	105	3,400	4,000	3.7	6221
110	200	38	2.1	144	117	3,200	3,800	4.36	6222
120	215	40	2.1	155	131	2,900	3,400	5.15	6224
130	230	40	3	167	146	2,700	3,100	5.82	6226
140	250	42	3	166	150	2,500	2,900	7.57	6228
150	270	45	3	176	168	2,300	2,700	9.41	6230