a) three phase brushless
generator, self-excited, 4-pole, singlebearing
b) AVR self-regulated, voltage regulation rate ≤± 1%
c) IP23protection grade
d) Class H insulation
e) Radio interferencerestraining accords with stipulation of VDE0875-N and ISO8528
f)Moistureproof, sand-proof, dustproof, salt-proof and vibration-proof
ControlPanelComAp brand controller
Option with: Deepsea,Smartgen
GeneratorProtections
1.Low oil pressure 2.Over temp3.Over/low speed4.Charger failure 5.Over crank Stop failure
6.Low/high charger 7. voltage Emergency 8.Common alarm Generating failure
StandardSupply Scope
Exhaust silencer | Flexi pipes | AVR | Base frame |
Starting battery | Battery wires | Battery charger | Main circuit breaker |
Cooling radiator | Wire diagram | Manual books | Auto controlpanel |
OptionalSupply Scopy
Water preheater | PMG | ATS | External daily fuel tank | Silent canopy |
Lube oil preheater | Spare parts | Parallel droop | Anti-condensation heater | ABB breaker |
Automatic fuel pump | Oil drain pump | Mobile trailer | Weatherproof canopy | Synchronization panel |
QualityAssurance
Factory Inspection, the test items before delivery aremainly as follows:
1. Eachgenset shall be put into commission more than 4 hours totally.
They are testedon idle load, fully load and 10% overload
2. The noise level istested
3. All of the meters on the controlpanel shall be tested
4.The appearance of the gensetand all of the label and nameplate shall bechecked
Warrantypolicy
Guarantee for one year or 1200 hours whichever reach first from ex-factorydate. During the guarantee period, KAPUR will provide the free easy-damageablespare parts of alternator caused by our quality of production or raw material.After expiration, KAPUR provides cost spare parts maintenance of alternator.
ManufacturingStandards
GB755, Third part of BS 5000,VDE 0530, NEMA MG1-22,IEC34,CSA C22.2-100 andASB59
FAQ:
1.Q: What is your MOQ of this item?
A: 1-10PCS
2.Q: What is the lead time?
A: 25-30 days after receiving your L/C or TT deposit.
3.Q: Is it all right to make customer's own brand name?
A: We can be your OEM manufacture with your authorization ofbrand.
4.Q: Where is your Loading Port?
A: Fuzhou, China Port.
5.Q: What are your payment terms?
A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
6.Q: What is your company's available production capacity?
A: 3000-5000 pieces against your orders.