Stainless steel sintered felt

Stainless steel sintered feltWith a protective mesh sintered felt

Stainless steel sintered felt, also known as non-woven fabric, is sintered by extremely fine metal fibers (diameter accurate to micron), and then after non-woven spreading, stacking and high temperature sintering. Stainless steel sintered felt is formed by a different aperture hole gradient which can be controlled to obtain a high filtering accuracy and greater dirt holding capacity. A three-dimensional mesh, porous structure, porosity, pore size distribution and other characteristics, it can continuously maintain the filtration fabric filtering effect. Due to the above structures and characteristics which makes stainless steel sintered felt have effectively compensated for blocking and wearing weaknesses, it also makes up for the fragile powder filtration products and the lack of flow, so the ordinary filter paper, cloth is not comparable to the temperature and pressure of characteristics, and thus stainless steel sintered felt is the ideal filter material for high-temperature resistance, corrosion resistance, high-precision environment. Xinxiang Meilin factory supplies air filter sintered and metal fiber felt at factory direct prices, welcome to inquire..

Features:

(1) Large dust holding capacity, high filtration precision, pressure raises slowly, cycle length
(2) High porosity and excellent permeability, small pressure loss, high flow.
(3) Corrosion resistance, high temperature resistant, resistance to corrosion of acid, alkali, organic solvents and drug, at 480 ℃ environment for long-term use.
(4) Easy processing, forming, and welding.
(5) Be produced according to user requirements are particularly enhanced, thickened type, intensive network type and various other specifications.
(6) Standard material: SUS316L or iron-chromium-aluminum fibers.

Series of Stainless steel sintered product technical parameters atmospheric

specification

filtration accuracy

(um)

air-permeability(L/min·dm2)

bubble pressure point(pa)

porosity

dirt holding capacity (mg/cm2)

Thickness(mm)

MLZ5

5

47

6600

75

5

0.54

MLZ7

7

63

5000

76

6

0.54

MLZ10

10

105

3700

77

6

0.54

MLZ15

15

140

2450

79

7

0.54

MLZ20

20

280

2000

80

13

0.54

MLZ25

25

360

1500

78

19

0.54

MLZ30

30

520

1230

79

34

0.54

MLZ40

40

670

960

79

34

0.54

MSW60

60

1300

650

85

36

0.54

Series of Stainless steel sintered product technical parameters

specification

filtration accuracy

(um)

air-permeability(L/min·dm2)

bubble pressure point(pa)

porosity

dirt holding capacity (mg/cm2)

Thickness(mm)

MLDZ20

20

280

2050

80

18

0.68

MLDZ25

25

350

1500

80

20

0.66

MLDZ30

30

500

1240

78

27

0.61

MLDZ40

40

650

496

78

35

0.61

Applications

   Stainless steel sintered filter with excellent filtration precision and is an ideal filter material for high temperature resistance, corrosion resistance, and high-precision environment. It is Widely used in the polymer filtration, oil, petrochemical, electronic hot temperature gas dust removal, oil refining process of filtration, viscose filtration, ultra-filtration filter, pump protection filter, membrane support, catalyst carrier, automotive airbag , ships, aircraft fuel filter, hydraulic system filter.

Note: filtration and dirt holding capacity is measured according to the provisions of GB/T18853-2002.
    Measure of the bubble point pressure is specified for GB/T5249.
    Air permeability is measured according to the provisions of GB/T53453, pressure difference is 200Pa, and medium is air.
   Fracture strength is measured by the regulations GB/T228.