Tablet PC Security Display Stand With Alarm

Product Description   
     Tablet PC Security Display Stand With Alarm are widely use for digital stores or

supermarkets to display Mobile Phones,Tablets and laptops,iPad, MP4, MP5 and other flat-panel

digital anti-theft alarm display, It can be installed on the showcase or display shelves, the customers

can be easily removed from the shelf display, Free to exhibit the operating of function and

appearance, If customer want to take goods away, the alarm will immediately send out continuously

and will last until managers to do the reset process.

Product Specification                                                          

Product Feature                                                           

Display Advantage:

1. Not viscous: almost all the material is not coated metal paint adhesion.

2. Heat resistance: a short time high temperature to 300 degrees Celsius, generally between 240-260

degrees Celsius, sustainable use.

3. Slide: load sliding friction coefficient changes, but the value is only 0.05-0.15.

4. Resist: coating non-stick surface water and oil, the production operation is not easy to dip solution.

5. Abrasion resistance: in the condition of high load, with wear-resistant performance quality.

6. Corrosion resistance: metal paint is almost not affected by drug erosion.

7. Painting: 3 times primer on the substrate, 4 times finish, each painted into clean thermostatic barn drying.

Display Disadvantages:

      Because usually use non-slip silicone is fixed, and often use, may use for too long after the glue stains

without non-slip, but don't worry, you just need to clean with clear water slippery silica gel.

Product Operation                                                        

1. Power ON/OFF Slide Switch: Please turn power ON before setting (on the bottom).

2. Tear off 3M stickers on the bottom, and stick metal bottom on display desk.

3. Tear off Silicone Rubber sticker (Metal Frame) and put Tablet PC on Silicone Rubber Holder, the

Silicone Rubber are NON SLIP.

4. Tear off 3M sticker on the Demo-Alert (small detecting sensor), and stick on Smart Phone (front or

rear side surface).

5. Set up Demo-Alert in Active position: press "ON" button on Remote Control; you'll hear a beep sound and

Red LED blinking (one time), the in Active position.

6. Demo-Alert Sensor: there are 2 detecting sensors and phone jack connector are detect point, either

one of detecting sensor Slip (in active position), Alarm warning immediately and Blue LED blinking until

alarm relief.

7. Relief alarm: press Remote Control "OFF" button to relief alarm warning and hear beep sound.

8. Active Display Charge: the provide charge function, when Tablet PC battery low, plug charge cable (I-Pad

to 3.5Φ charge cable) between Tablet PC (Micro USB port) and Magnetic connector (a black hole at left

side Magnetic connector).

9. Low Power Indicator: when green LED light blinking, please plug USB port into to AC adaptor, mini USB

plug into left side Demo-Alert metal base, then AC adaptor plug into Outlet (please avoid battery dried-

up).

10. Working Period (in Active): 2 weeks (full charge).

11. Charge Time: 5 hours.

12. Low Power: Green LED blinking until power dried-up or charge.

13. Charging: Red LED turns ON.

14. Full Charge: Green LED turn ON.

15. Alarm: Red LED Blinking.

16. In Active (when you set up Alarm): Blue LED Blinking.

17. Remote Control: 5 units with one remote control.