Tungsten Carbide Rods
Tungsten Carbide Rod is mainly made of WC and Co by powder metallurgic method processing. They have a good shock resistance and bending resistance. With more than 20 years' experience, we are able to provide you the carbide rods you want.
RECOMMEND GRADES AND SPECIFICATIONS:
| Grade/ Properties / Application |
| Grade | Equal to ISO Category Number | Performance | Performance&application recommended |
|
| Density | Bend Strength | Hardness |
|
|
| G/Cm 3 | N/mm 2 | HRA |
|
| YG6X | K10 | 14.8-15.1 | ≥1560 | ≥91.0 | Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron. |
| YG6A | K10 | 14.7-15.1 | ≥1580 | ≥91.0 |
|
| YG6 | K20 | 14.7-15.1 | ≥1670 | ≥89.5 | Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc. |
| YG8 | K30 | 14.6-14.9 | ≥1840 | ≥89 | Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts. |
| YG10X |
| 14.5 | 2400 | 91.5 | Fine grain alloy, good wear resistance,Used for processing hard |
|
|
|
|
| wood, veneer board,PCB,PVC and metals. |
| YL10.2 |
| 14.5 | 2400 | 91.8 | Forming or stamping dies for metal powders and nonmental powders. |
| YG13X |
| 14.3 | 2600 | 89.5 | For oil cone dril bits, for medium soft and medium-hard rocks. |
