GCR DGBB 6207 6207-ZZ 6207-2RS
1.5 USD
| Min. Order: | 5000 Piece/Pieces |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 0.3 MILLION PCS PER MONTH |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Service |
Product Detail
| Model No.: | 6208 6208-ZZ 6208-2RS |
|---|---|
| Means of Transport: | Ocean |
| Brand Name: | JUF |
| SIZE: | 40*80*18 |
| MATERIAL: | GCR15 SAE52100 |
| GREASE: | JUF3# |
| PRECISION GRADE: | P0/P6/P5 |
| FITNESS: | C0/C3 |
| OEM SERVICE: | AVALABLE |
| PACKING: | TUBE |
| MARKING: | JUF or NEUTRAL or BLANK |
| Production Capacity: | 0.3 MILLION PCS PER MONTH |
| Packing: | TUBE |
| Delivery Date: | 20 DAYS |
Product Description
DeepGroove Ball Bearing is the most representative rolling bearing, it cansuffer from both axial and bidirectional radial load.
Itcan be used in these occasions with the demand of high rotation, lownoise, and low oscillation. Bearing with seal together with steel coverof rubber seal usually filled with lubricant in advance ,the outsidering with stopping circle or flange ,these will not only be easier foraxial orientation ,but also good for the installing of outside shell.The size of maximum loading bearing is just the same as standard bearing,while with backfill trough in the inside and outside ,which can addthe balls, and improve the maximum load at the same time.
Installation
The bearing installation has close relationships with the accuracy, life and performance. Therefore the design and assembly departments should fully research into the bearing installation.
It is better to implement installation according to the operation standard. The items of the operation standard are usually as follows:
(1) Clean bearing and its related parts
(2) Check the size and finishing conditions of the related parts
(3) Installation
(4) Examine bearings after installation
(5) Feed the lubricant
The bearing packing should be opened shortly before installation. There is no need for cleaning to ordinary lubricating grease lubrication, direct-filling of lubricating grease or lubricating oil. Whereas it should use the clean oil to rinse the instrument purpose bearing or high speed purpose bearing etc. and get rid of the anti-rusting agent on the bearing. The bearing easily gets rusty without rust inhibitor. Therefore special care should be taken to such kind of the bearing.
What is more, the bearing which has been sealed with lubricating grease can be put into direct use with no cleaning at all.
The installation methods of the bearing vary according to the difference in the bearing structure, matching, condition. As it is mostly of axle rotation, the inner ring needs interference fit. The cylindrical bore bearing is commonly pressed in by pressing machine or most probably, it adopts the heat installation method. The taper hole can be directly
installed in the taper axle or by sleeving.
When it has been mounted to outer casing, usually it has excess clearance fit, the outer ring has shrink range, it will be pressed in
It is better to implement installation according to the operation standard. The items of the operation standard are usually as follows:
(1) Clean bearing and its related parts
(2) Check the size and finishing conditions of the related parts
(3) Installation
(4) Examine bearings after installation
(5) Feed the lubricant
The bearing packing should be opened shortly before installation. There is no need for cleaning to ordinary lubricating grease lubrication, direct-filling of lubricating grease or lubricating oil. Whereas it should use the clean oil to rinse the instrument purpose bearing or high speed purpose bearing etc. and get rid of the anti-rusting agent on the bearing. The bearing easily gets rusty without rust inhibitor. Therefore special care should be taken to such kind of the bearing.
What is more, the bearing which has been sealed with lubricating grease can be put into direct use with no cleaning at all.
The installation methods of the bearing vary according to the difference in the bearing structure, matching, condition. As it is mostly of axle rotation, the inner ring needs interference fit. The cylindrical bore bearing is commonly pressed in by pressing machine or most probably, it adopts the heat installation method. The taper hole can be directly
installed in the taper axle or by sleeving.
When it has been mounted to outer casing, usually it has excess clearance fit, the outer ring has shrink range, it will be pressed in