1×2  Solid-State Fiber optic Switch

Description

1×2  Solid-State Fiber optic Switch

The 1x1 and 1x2 solid-state fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all solid sate CL 1x1,1x2 fiber optic switch features low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, and fast response time. 
The switch also has build-in circulator and isolator functions. Electronic driver is available for this series of switches.
 ◇Features
    Low Insertion Loss
    Wide Wavelength Range
    Low Crosstalk
    High Stability, High Reliability
    Epoxy-free on Optical Path
    Latching and Non-latching

◇ Application
Metropolitan Area Network
R&D in Laboratory
System Monitoring
Configurable OADM

◇ Performance

◇ Electrical Driving Information 

The switch is actuated by applying a voltage pulse. Applying one polarity pulse, one light path will be connected and latched to the position. Applying a reversed polarity pulse, another light path will be connected and latched to the position after pulse removed. 

Driving kit with USB and TTL interfaces and Windows TM GUI is available. We also offer RS232 interface as an option – please contact coreray sales. 

                    2x1 Switch

                    1x2 Switch

* The typical drive voltage of single stage is 2.5V. 

* Over this value will damage the device. 

◇ Mechanical Dimensions (mm) 

◇ Ordering Information