0.6/1KV AL/XLPE ABC overhead cable

Primarily used for overhead service applications such as street lighting.Outdoor lighting, and temporary service for construction. To be used at voltagesof 600V phase-to-phase or less and at conductor temperatures not to exceed 75°cfor polyethylene insulated conductors or 90°c for crossliked polyethylene(XLPE)insulated conductors.

Concentric strand or compressed 1350-H19 conductor, poly- ethyleneor cross linked polyethylene insulation,concentric strand AAC, ACSR or 6201alloy neutral messenger.

XLPE(PE) insulatedabc cable (service drop)covers mainly threetypes:

Duplex Service Drop

Triplex Service Drop

Quadruplex Service Drop

The cable can be produced whose construction is phase conductor with neutralbare conductor or phase conductor with insulated neutral conductor , etc. And wecan still produce the cables according to the request of customers.

To supply 120 volt aerial service for temporary service at constructionsites,outdoor or street lighting . For service at 600 volts or lower at aconductor temperature of 75 maximum.

To supply power from the ulility`s lines to the consumer`s weatherhead. Forservice at 600 volts or less(phase to phase ) at a conductor temperature of 75maximum for PE insulation or 90 maximum for XLPE insulation .

Used to supply 3 phase power , usually from a pole-mounted transformer to theuse`s servic head where connection to the service entance cable is made . To beused at voltages of 600 volts or less phase to phase and at conductortemperature not to exceed 75 for PE insulated conductors or 90 for XLPEinsulated conductors.

Standards
1. B-230 Aluminum Wire, 1350-H19for Electrical Purposes.
2. B-231 Aluminum Conductors,Concentric-Lay-Stranded.
3. B-232 Aluminum Conductors,Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR).
4. B-399Concentric-Lay_Stranded 6201-T81 Aluminum Alloy Conductors.
5. B498Zinc-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR).
6. Duplex Service Drop cable meets or exceeds all applicable requirements ofANSI/ICEA S-76-474