Features
1/non-toxic, eco-friendly
2/easy to clean and install
3/waterproof, nonslip
4/Little color distortion
5/Color is bright and beautiful
6/Nice-looking packaging box to attract potential
| Item Name: | Hot stamping film for tissue box/ABS tissue box/AS tissue box/PP tissue box/PE tissue box/Wooden tissue box |
| Usage | for tissue box/ABS tissue box/AS tissue box/PP tissue box/PE tissue box/Wooden tissue box |
| Material | ABS/AS/PP/PE/EVA |
| Thickness | 0.02mm--0.025mm |
| Delivery Time | 10~15 days |
| Method | Heat transfer printing |
| Brand Name | YiXin |
| Material Type | Foil |
| MOQ | 600 square meters |
| Maximum colors | 10 |
Procedure of Films production
1. Artwork we will make an layout design for you ,according to your given draft design and product detail
↓
2.Confirm the artwork After you confirm the final design then we will start for the plate making
↓
3.Plate making It takes about 7~8 days
↓
4.Film printing Print in big rolls →drying → cut into small rolls →quality check
It takes about 4-5 days
↓
5.Packaging Polybag+drying agent+carton
↓
6. Delivery By express, by Sea, or by air →It's up to you
What should we notice with heat transfer printing?
Heat transfer printing is a new and special printing style with simple operation principle.It transfers the design from the heat transfer films to the surface of products when heated and pressed.However,in practical experience,need to pay attention to below a few points to improve the quality and production efficiency.
1.Stamping Temperature
Stamping temperature varies from the printing equipments\films and the products.It cannot take the higher or lower temperature as the best stamping temperature.We need to confirm the most suitable stamping temperature based on the actual printed effect.
2.Stamping Time(Speed)
Stamping Time(Speed) need to be decided by the specific products.In the condition of confirming the good printing effect,the speed is faster,the production efficiency will be higher.But some products need to stamp in slow speed because it is limited by some special conditions.
3.Stamping Pressure
Stamping pressure need to be adjusted to the most suitable one,or it will damage the pad and products if over pressured and it will influence the printing effect if stamping in less pressure.So it need to lock the pressure adjustment after confirm the best stamping pressure in case that it will make some change when printing in large quantity.
4.Keep Clean Always.
A.Keep the pad clean always,any dirt or coke does not permit sticking there.
B.Keep the workbench\roller\button and the other parts clean,it can not have some greasy dirt there.
C.Hands of operators need to keep clean,any sweat or dirt cannot get in touch the films and the products.
D.Keep the films clean always also in case it will get pollution by the greasy dirt ,fingerprints or the dirt
Heat transfer printing tissue box
Thermal transfer printing tissue box
Beautiful heat transfer film;heat transfer film for tissue box
Colourful thermal transfer film:thermal transfer film for tissue box
About our factory
Workshoop of Aeon Printing Materials Co,.Ltd
Exhibition room of Aeon Printing Materials Co,.Ltd
Welcome to contact us if there is any doubt of you in heat transfer printing
