Lexia-3 Citroen Peugeot V48 Lexia3 PP2000 V25 Diagnostic Tool
1.0~66.0 USD
| Min. Order: | 1 Piece/Pieces |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | L/C, D/P, D/A, T/T, WU |
| Supply Ability: | 10000 |
| Place of Origin: | Guangdong |
Company Profile
| Location: | Shenzhen, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Means of Transport: | Air |
|---|---|
| Production Capacity: | 10000 |
| Packing: | standard |
| Delivery Date: | 3-7days |
Product Description
with newest diagnostics software allows you to perform completediagnostics of all from 1995 untill present models. Lexia-3 CitroenPeugeot V48 Diagnostics is performed via OBD-II connector
Lexia-3 Citroen Peugeot V48 Lexia3 PP2000 V25 Diagnostic Tool
The Lastest software version:
PP2000:25.01 (11A)
LEXIA-3:348.01(V48)
Diagbox:V6.13 (available at now)
(Update V6.01 to V6.13)
Can support to 2011 vehicles(cars) including:
Peugeot: iON107 206 207 NOGGAR 307 308 RCZ 407 408 508 607
807 1007 3008 4007 5008 BIPPER PARTNER EXPERT
BOXER 106 205 306 309 405 406 605 806.....
807 1007 3008 4007 5008 BIPPER PARTNER EXPERT
BOXER 106 205 306 309 405 406 605 806.....
CITROEN: C-ZERO C1 C2 C3 DS3 DS4 DS5 C5 C6 C8 C15 SAXO NEMO
JUMPY AX BX ZX XM XSARA EVASION C-ELYSEE XANTIA
ELYSEE BERLINGO.....
Supported functions
Unlikeother universal car scanner tools which only read fault codes, thissoftware performs nearly ALL the functions like the original dealerdiagnostic tool. Our diagnostic interface contains K-Line multiplexor,CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
The following diagnostic functions are supported:
Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
Clear fault codes
This function clears all stored fault codes and other diagnostic information.
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values
Program displays live Data like Engine Speed, Battery voltage, OxygenSensor, Coolant Temperature, etc. Values can be displayed in graph, 9values at once, or full listing (all measured values). Logging to fileis also supported, which allows offline analysis.
Program displays live Data like Engine Speed, Battery voltage, OxygenSensor, Coolant Temperature, etc. Values can be displayed in graph, 9values at once, or full listing (all measured values). Logging to fileis also supported, which allows offline analysis.
Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump,lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Actuator test activates particular actuator (e.g. turn on fuel pump,lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Programming functions/Adaptation
This feature is of great importance in all vehicles because systemslike Engine control units, Immobilizers, Airbags, Alarms, Body ControlUnits, and some others, require you to perform reset or programmingprocedures after car repair is done, or even configuration afterreplacing broken Control Unit.
This feature is of great importance in all vehicles because systemslike Engine control units, Immobilizers, Airbags, Alarms, Body ControlUnits, and some others, require you to perform reset or programmingprocedures after car repair is done, or even configuration afterreplacing broken Control Unit.
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MBRAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) andMicrosoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC. e
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MBRAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) andMicrosoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC. e
Set includes:
1pc x Main unit
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable(16pin)
1pc x 16pin to 2pin Cable
1pc x Instruction for Installation and Activation DVD for PP2000 Lexia-3 Diagbox
Software CDincluding:
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable(16pin)
1pc x 16pin to 2pin Cable
1pc x Instruction for Installation and Activation DVD for PP2000 Lexia-3 Diagbox
Software CDincluding:
PP2000:25.01 (11A)
LEXIA-3:348.01 (V48)
Diagbox:V6.10(Update DiagBox V6.01 Update to V6.10)
PPO Software supported language:English, Chinese, German, French, Japanese, Russian, Arabia, Spanish,Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian,Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish,Czech, Croatia, Thai.
Lexia Software supported language:English, German, French, Japanese, Russian, Spanish, Portuguese,Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.