Thermal Shock Chamber supply

Thermal Shock Chamber supply

Thermal Shock Testers/Technical Specifications :

1.TS-42A

2.Studio Size : 46*46*46cm

3.High temperature chamber temperature range : room temperature ~ +150 degree cold room : room temperature ~ -60 degree

4.heating and cooling rate : 1.5 degree per minute on average

5.Temperature fluctuation : less than about 0.5 degree

6.Temperature error: less than about 2 degree

7.temperature conversion time : less than 10S

8.temperature recovery time : less than 5min.              [sales(at)aslitestiing.com]

9.impact of conversion: Conversion cylinder

10.Material Case : SUS # 304 stainless steel liner : SUS # 304 stainless steel

11.Cooling System: two yuan duplex compressor cooling ( air-cooled or water-cooled ) , imported French Taikang compressor , environmentally friendly refrigerant

Thermal Chambers/Control System:

1.with RS-232C communication interface device can be controlled with a computer online / editing / recording , and two group dynamic contacts (TimeSignalRelay), easy to use.

2.perform thermal shock conditions , choose 2Zone or 3Zone function.

3.have fully automated , high-precision system loop , either mechanical action, completely locked processed by the PLC.

4.The mechanical defects , with automatic machine loops and warning signals . When the input power was found unstable , with emergency stop devices.

5.Uses: mainly used in electronic components, high temperature material impact test.

Cold Thermal Shock Tester/Features:

1.Europe's most advanced new proof handle , perfect design , the appearance of the texture of a high standard .

2.using a large man-machine dialogue LED machine interface touch controller , simple operation, easy to learn , stable and reliable.

3.Impact method using style switching mode , the cold and hot temperatures into the test area to achieve thermal shock testing purposes.

4.Impact time of 0.1 to 999.9 hours , cycle times can be set from 1 to 9999 .

5.to set the number of automatic defrost cycles and (manual ) defrost .

Application of standards and meet the standards

1.GB/T2423.1-1989 cryogenic test methods ;

2.GB/T2423.2-1989 high temperature test methods ;

3.GB/T2423.22-1989 temperature test ;

4.GJB150.5-86 Thermal Shock Test ;

Certificate of these machines:

China official 3rd party calibration report

CE certiification

For the package:

1. PP film first

2. Vacuum package

3. PP film again

4. 10mm thickness PU foam to avoid collision

5. stronged plywood case

6. Standard ASLI CASE MARK

Our Main Products:

1) temperature humidity chamber

2) temperature fast change chamber (ESS chamber)

3) thermal shock chamber

4) temperture humidity combined salt spray chamber

5) temperture humidity combined vibration chamber

6) pressure accelerated aging chamber (PCT&HAST chamber)

7) high temperature aging chamber

8) sand and dust tester

9) rain/water spray chamber

10) salt spray chamber

11) UV climate resistant chamber

12) high temperature chamber/muffle furnace

13) vacuum oven

14) high frequency vibration tester

15) mechanical shock and impact tester

16) acceleration mechanical shock tester