Single Pole Insulated Conductor Rail 500 to 800A for Bridge Crane

Single Pole Insulated Conductor Rail 500 to 800A for Bridge Crane

• Standard length; 4m or 6m.
   
• Current: 100A~1250A
   
• Conductor material: Aluminium, copper
   
• Support spacing: 1.8m or 2.0m

Conductor Bar, Single Pole Conductor Rail, Single Pole Insulated Conductor Rail, Insulated Bus Bar

Detailed Product Description

The JDC-H conductor rail system is a modern power supply system using single pole insulated conductor rails. It complies with the latest regulations and provides the electric energy for material handling equipments such as overhead cranes.

The aluminum conductor rail is provided with a proven and patented stainless steel contact surface. Any numbers of poles can be installed vertically or horizontally, on straight or curved systems.

The entire conductor rail system can be installed indoor or outdoor. It is insulated conforming to Current Safety Regulations. Ground insulation cover is marked yellow-green on one side over the entire length of the rail.

R Type: for curves R≥1200mm.

Approved and listed by: CCC, ISO9001 and CE.

Conductor bar systems are used for the electrification of mobile equipment. Conductor bar is a safe, economical and low maintenance way to solve mobile electrification requirement. Systems can be designed to accommodate 60 to1200 amperes. Depending on the application there are various options and accessories that can be custom engineered for your conductor bar system. Portions of the system can be pre-assembled at the factory to help ease installation.

Application

The ranges of applications of JDC Insulated Conductor System:

1. Overhead and elongated tracks for cranes. 
2. Electric hoists, electric tools, stacking systems, monorail systems.
3. Electric tools.
4. Other applications for supplying power to moving power load.

Design features:

1. Compact arrangement,
2. High safety insulation housing, corrosion resistance.
3. Easy and exact mounting with multiple supporting bracket.
4. Easy installation.

Housing:

The well insulating green plastic housing holds 3-6 conductors. Usually 4m standard length and other length to meet your runway requirements are available. The ground line is identified by the yellow color so that avoiding phase reversing.

Joints:

Snap-in joint splices provide mechanical and electrical continuity. Insulated protection covers are included. 

Feed Sets:

End feeds or line feeds are available.

End Caps:

The open ends of the conductor are closed by end caps.

Hangers:

Standard brackets for powerail attachment to crane girders are available. Powerail is with sliding and fixpoint hangers.

Standard distance between suspension points for indoor and outdoor installations: 1200mm.

Expansion Section:

The Expansion sections are required to compensate the different expansions between copper conductors and steel-or concrete structures,in varying temperatures without interrupting electrial power.

Expansion joints are used when the Powerail length between feeds,curves,switches or other fix points is exceeding 20m. Install expansion joint according to actually installation.

Isolating Section:

Isolating sections are required if parts of the system or individual rails are to be de-energized within a conductor rail system. To prevent a voltage bridging by current collector two air gap isolating sections should be installed.

Collectors:

The current collectors are made of carbon brush, re-inforced nylon and galvanized or spray-paint metal material. Spring loaded carbon brushes maintain uniform contact. Connecting cables and hinged or flexible towing arms included. Double Current collectors for transfer applications and higher amperage are available.

Technical Parameters