600W Grid Tie Inverter For Wind System DC/AC Input 10.8V- 30V
| Payment Terms: | T/T, paypal, WU |
|---|
Company Profile
| Location: | Shenzhen, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Power Inverter, Pure Sine Inverter, Solar Inverter, Grid Tie Inverter, Uninterruptible Power System (UPS) |
Product Description
The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid tie wind turbine inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid.
This model grid-tie has designed for wind turbines. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can't keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.
For the AC output 3 phase wind turbine system ,There are 5 terminals on the left side of the inverter, 3 terminals will be connected to the AC output from the wind turbine, and 2 black terminals will be connected to dump load resistors.
For the DC output wind turbine system, There are 4 terminals on the left side of the inverter, 2 terminals will be connected to the DC output from the wind turbine, and 2 black terminals will be connected to dump load resistors.
Detailed specification:
Model | GTI-W600 | |
AC Output Continuous Power | 550W | |
AC Output Max. Power | 600W | |
AC Output Voltage Range | Switch at 230V Position | 190V ~ 260V |
Switch at 115V Position | 90V ~ 130V | |
AC Output Frequency Range | 46Hz ~ 65Hz | |
Total Harmonic Distortion(THD) | <5% | |
Power Factor | 0.99 | |
Input DC or AC Voltage Range ( Optional ) | 10.8V ~ 30V | |
Peak Inverter Efficiency | 92% | |
Standby Power Consumption | <0.5W | |
Output Current Waveform | Pure Sine-wave | |
Recommend dump load resistor | 5 ohm/500w | |
Operating Temperature Range | -10 0C ~ 45 0C | |
Storage Temperature Range | -40 0C ~ 65 0C | |
Product Size/pc | 272 * 233 * 95mm | |
Package Size/pc | 332 * 265 * 145mm | |
N.W./pc | 4kgs | |
G.W./pc | 4.5kgs | |
Featured Function:
Separate MPPT control function | |
Stackable setup & free combination, without interaction | |
Easy installation, simple operation, low cost maintenance | |
High Wind Protection | Automatic disconnect from the wind turbine |
Over Current Protection | Slow down inverter inner current |
Short Circuit Protection | Buzzer alarm, Led light stay orange color |
Over Temperature Protection | Auto-recovery after cooling down |
Reverse Polarity Protection | Built-in fuse burnt-out, fuse replaceable |
Anti-Island Protection | Grid no voltage- LED red light stay ON Grid beyond voltage- LED red light twinkle |