Automatic plasma treating equipment

_{attached photos for mobile screen treatment}

model	input voltage/frequency	woring frequency	output power	treating width	air source
FR50BR	AC220/230V±10% 50/60Hz	22.5KHz	300-600W	30-50mm	0.4Mpa n

In order to solve the polarization problem of three-dimensional surface , our company successfully developed FR-50BRprocessor low-temperature plasma machine(corona treator).

As the energy of low-temperature plasma is greater than polymer bond material ,it can fully destroy the chemical bonds in organic molecules to form a new bond, but far below the high-energy radioactive rays. Therefore, only related to the surface, without affecting the overall performance of the material. By low temperature plasma-treated surface, while after the physical and chemical reactions, to surface roughness (the naked eye can not see, does not affect the appearance) and the formation of charged groups, greatly improving the ink, adhesives and adhesive strength of the surface . Effective solution to marking, coating, spraying and printing problems, which make our products more competitive in the market .

What is plasma

Plasma is an electrically-conductive gas,consisting of positive and negative atoms and molecules. This is known in physics as the :Fourth state of matter" the plasma state is inherently unstable,and requires a permanent supply of energy to keep the plasma active.

Air is the prefereed medium for conversion to plasma.for special application,other gases and gas mixtures can be used directly, provided that they are non-flammable.the plasma gases ionise and dissociate through the energy in to the plasma arc.directly after the plasma arc has been formed,the atoms and molectures recombine at the end of the plasmajet nozzle,instaneously setting the produced energy free. This reinforces the chemical and physical effects of the plasma beam on the material surface. The results include chemical modification t the polymer surface through the combination of oxygen molecules. A cleaning effect is also realized by the destruction of surface contaminants.functional non-substrates can also be produced using a suitable choice of the process gas.

introduction

1.industrial use of smart chip control processing, the plasma output power canbe precisely regulated and setting.
2.set power can be remember until the next boot(not affected power failures).
3.power would be smart after the creation of precise lock, without external voltage fluctuation and working conditions of influence, thus the treatment effect of plasma stabblity,and also reduced the passive manual intervention
4.LCD function,Set power display, the actual dynamic power display.
power of state data shows :Frequency,mediun voltage current ,real time power supply voltage and so on.
machine warning display
5. online ready to ok the external signal input .external equipment to confirm the site is ready,the ,machine can only start the working
noted: this signal can be directly shorted wiring end, as the feature by default
6.In addition to this machine from the panel buttons take the initiative to do"start" and "suspension"of the active control mode the machine .also has an external control input of the passive control mode.
7.the machine have many type of automatic monitoring and waring capablities.
8.the machine can according the surface treatment request,Pressure on the plasma jet continuously adjustable.
9.the machine can according to the customer surface treatment function request ,equipped with a variety of plasama injection nozzle.
10. the interior design of this machine with a variety of interfaces be reserved, you can according to customer requirements, combined with the actual production line of on-line installation of variety of automatic control functions
Noted:must be according to customers request commission.
11.one unit can combine many plasma generators and match more nozzles ,according to customer's requirments.

Contact Supplier