Industrial Adsorption Desiccant Dehumidifier For Basement, Garage 14.4L/D

1. Name: Industrial Desiccant Rotor Dehumidifier
2. Dehumidifying Capacity: 0.6kg/h / 14.4L/D
3. Process air flow: 220m3/h
4. Reactivation air flow: 60m3/h
5. Voltage: 230V
6. Current: 7A
7. Power rating: 1.2KW  Max power: 1.5KW
8. Applied Temperature: -20°C-70°C
9. Body: Stainless Steel
10. Dimension: 450*300*650mm
11. Applications: Used for drying basement, garage, cellar,  crawl space, small space

Industrial Adsorption Desiccant Dehumidifier For Basement, Garage 14.4L/D

Specifications:

RY-M series has a unique design. The air treatment is done in a closed durable thermoset, RY-M dehumidifiers conform to both harmonised European Standards and to CE marking specifications. Besides, RY-M rotor technology is the precision seals which divide the air distribution chamber. These provide a precise airflow balance for dehumidification and reactivation while allowing for alternative fan placement and rotor sectioning.

It is designed for drying basement, garage, cellar or any samll/narrow space area. Good quality products come from strict control of moisture content. Incorporating Proflute rotor from Sweden. The machine has a stable performance. Quality of the end products is ensured (in respect of strength, hardness and transparency etc). Standard control by P.I.D. temperature controller from Germany, PLC controller with LCD touch control panel and dew point meter available as option.

How Desiccant Dehumidification Works

In a typical dry desiccant system, the desiccant is mounted on a rotating wheel.   As the wheel turns, the desiccant passes alternately through the incoming process air where the moisture is adsorbed and through a “regenerating” zone where the desiccant is dried and the moisture expelled.  The wheel continues to rotate and the adsorbent process is repeated. 

Typically, about three-fourths of the desiccant wheel is exposed to the incoming air throughout the process.  During regeneration, the desiccant is heated by a direct-fired gas burner or indirect-fired water or steam coil.

Process Inlet—Air to be dried.  May be outside air, inside air or, more commonly, a mixture of air with high humidity content.

Process Outlet—Air is dried by desiccant wheel.  May be cooled, filtered or otherwise handled.  Relative humidity is substantially lower and temperature slightly raised.

Reactivation Inlet—Air flow, usually outside air, that drives moisture off wheel.   Reactivation air is heated by direct-fired gas burner or indirect-fired water or steam coils.

Reactivation Outlet—Hot, wet air from wheel is exhausted outside or passed through an air-to-air heat exchanger. Using a heat exchanger to preheat incoming process air offers substantial savings in northern climates.

Applications:

1. Processing and production areas

• Brewing
• Chemical and petrochemical product
• Electronic products
• Wind power eneration
• Food industry
• pharmaceutical  inductry
• Synthesis of glass
• Sandblasting processing
• Bridges building
• Rubber manufacture

2. storage

• Corrosivity  metal
• Electronic products
• Food 
• Military equipment
• Precise instrument
• Seeds
• Sugar

3. Packing

• Related Searches: Dehumidifier Desiccant D Ring D Shackle D-Glucosamine Silica Gel Desiccant D-Glucosamine Hcl Garage Door Garage Doors Garage Equipment

  Show