Microfiber Tornado Mop for floor cleaning industrial mops

Note: If the manufacturer of your tile, linoleum or hardwood floor has issued specific care instructions, then you should follow those. (Every Parquet wood floor I've ever washed required using a mop and a special cleaner, for example.) Otherwise, you should be able to use these instructions with fantastic results.

Hardwood Floors
Hardwood floors demand special care in order to keep them looking shiny and attractive. Since wood is a porous material, the rule of thumb is: the less water, the better. That means, hardwood floors should be mopped with a well-wrung out mop or soft rag.

First, clear the room of all small furniture and other items. Then, use a soft bristled broom to remove the larger dirt and debris; be sure to get inside corners, under counters, around toilet bowls, et cetera. (Even though many vacuum cleaners have a "bare" floor setting, never use this machine on hardwood floors as it can dent, scratch and gouge them.)

The next step, before you can mop a floor so clean you can eat off it, run a dust mop over your hardwood floor. This will remove any dust or lingering dirt.

If the floor is very big- larger than an average eight by ten foot room- or, if the floor is heavily soiled, you'll need more than a single bucket of wash water. But to start with, fill up a bucket with cool- never hot- tap water and mix in a mild cleaner that's suitable for most hardwood floors like Murphy's Oil Soap. Why not hot water? It can dissolve wax, for one reason. It can also cause your floors to streak.

Note: The best type of mop to use is a cotton string one. They can be heavy and hard to manage, though. Libman makes a lightweight Wonder Mop that has absorbent strips instead of strings. This mop is easy to dunk, wring out and push across any floor.

Dunk the mop into the bucket and wring it out well. Then, start in a corner of the room right up to the baseboard. To mop a floor so clean you can eat off it, you need to clean the corners and move along the baseboard by using a straight back and forth motion. Then, move away from the baseboard and mop an area approximately three by three feet square. Move your mop back and forth making sure to overlap each stroke as you go. As the mop head becomes soiled, flip it over from time to time.

To remove dried spills and messes, you'll have to work at them with the mop since you shouldn't use scouring pads on hardwood. Simply push down on the mop as you push it across the soil. You can use an old soft rag in the same way too.

Work your way across the room dunking, rinsing and wringing your mop as you go. Make sure you end up backing out of the room through an interior doorway so you don't get trapped inside. Allow the floor to air dry, and you're done cleaning your hardwood floor!

Tile and Linoleum Floors
To mop a tile or linoleum floor so clean you can eat off it, the process is pretty much the same as a hardwood floor, with a few exceptions. First, you can use a scouring pad to remove dried spills and messes. Second, you should use a floor cleaner such as Spic-n-Span or Lysol brand. Top Job is a heavy duty cleaner that can tackle the dirtiest of floors. However, since it contains ammonia, it can take off the wax, so keep that in mind. And, of course, don't forget, you can also add a half cup of good ol' fashioned vinegar to a full bucket of cool tap water too!

In-process management procedures

1.According to production requirements,logistics is resposible for establishing EHS requirements,rational layout of the production enviroment,production department to maintain the production according to 5S management requirements,to a special enviromental in equipment or procedures,need to have a formal document specify that the staff must strictly enforce,on the anti-static requirements of the process and location,must operate strictly in accordance with the guidance document and the corresponding documentation for operation.

2.Engineering resposible for equipment maintenance, specific maintenance contents fefer to production equipment control procedures.

3.Production resposible for assist materials control Department of the online materials,and manage scrap units.

3.Production control production line output according to plans,use the "production internal maintenance form"record and track human,machines,materials and technics abnormity in produce process;quality control/Engineering Department make a patrol inspection on the production line to control the production process quality.According to the process and equipment characteristics,the production process will be devided into general process,key process,and special process for different levels of control.

4.1                                                             General process control

4.1.1 Before production,should confirm raw materials preparation,equipment status,operation guide books,staff skills.

4.1.2 Strictly operate in accordance with the guidance books,through the operator self-inspect,multi- inspect and QA patrol inspect for real-time monitoring quality.

4.1.3 The feedback of fluctuate process:promote production management principles.

4.1.4 The defective in prodction operate according to "Defective control procedue"

4.1.5 Record and stat production status

4.2                                                         Key process control

According to product characteristics,the company confirm the fire detector calibration processes and functions of mobile detector test processes for key processes.

4.2.1 Pre-production with the test samples could confirm whether the equipment used for the production and make records.

4.2.2 Quality selective inspect of the fire detector sensitivity to control the accuracy of calibration.

4.3                                              Special process control

According to product characteristics,the company confirm SMT,reflow solder,hands and wave soldering process for the special process and the specific special control refer to "special process control procedure".

5.Production process should be operational by guide book guide,operation guide book shall be in writing in pictures combined description code,and pay attention items and quality standards.

6.Quality records requirement in the process should follow the related contents of Record control procedure".

7.After the end of production,after the inspection and acceptance by quality control,the packing storage,warehouse confirm quantities and arrange every lot intergated qualified products to meet the quantities request of shipment orders.If the inventory were stored for more than three months and need to ship,the materials control department supply appliactions,after the production rework,the inspector re-inspect,and passing inspection,then shipment.

Professional supervision Loading




Carton Fair we've attended







Workshops review:


Company tenet:
With the mission of customers first,quality oriented,Ningbo Master Clean Commodities Co.,Ltd. pays special attention to technology innovation and quality stability,and offer best quality products and services to customers and clients warmheartedly to satisfy customers.

Contact Supplier