GSM950 cellphone signal repeater

Min. Order:	1 Piece/Pieces
Payment Terms:	T/T, paypal, WU
Supply Ability:	50000pcs per week
Place of Origin:	Guangdong

                                                         GSM950 cellphone signal repeater
Introduction
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

2. Features

High gain, easy installation and operation.

Full-duplex, single-port design, build-in power supply.

Use ALC technology, adjust extent automatically

LED Light Working & Signal Condition Indicators

Big linear power, control intermodulation & scatteration stably

Dependability stand by GB6993-86 standard

Compatibility of electromagnetism according with ETS300 609-4

CE and RoHs Approved

Frequency range	Uplink:890—915MHZ   Downlink 935-960MHz
Gain ( dB)	Uplink  Gp≥50 Downlink   Gp≥55
Export power (Po)	≥17dBm
Pass band ripple	≤3dB
I/O impedance	50Ω/N connector
Noise figure	≤4dB
Transmission Delay	≤0.5μs
Ambient temperature	-10℃~60℃
Power supply	AC110~240V   45~55Hz
Size	220 x 140 x 40 mm
Reliability	To the GB6993-86 standard
Electromagnetic compatibility	To the ETS300 694-4 standard
Function	a) Power supply LED denote b) Export power LED denote
coverage  area	200 m2

1. Fix up outdoor antenna reception on housetop and point to signal tower.
2. Connect outdoor antenna to "outdoor" port in repeater machine through cable.
3. Connect indoor antenna(s) to "indoor" port in repeater machine through cable also.
4. Plug power adaptor into AC power socket and finish installation.

1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
2. If can not call out, please adjust the direction of outdoor antenna.
If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antenna have distance of 20