General Description
CRLX, CRLB, CRLT, CRLK Series vertical mixed flow pumps are widely used in handling circulating water in large scale power stations and nuclear power stations, metallurgy, water supply & drainage of municipal facilities and farmlands as well as mining drainage. They are provided for delivering clear water , rainwater, sewage and seawater below 55℃.
Performance range
Capacity Q:0.20~25m3/h
Head H:3~60m
The pump of the above-mentioned range can be tested in our test center which is the largest in China.
Instruction of pump type
For example:80CRLK-20A / 80CRLB-20A / 80CRLX-20
80: Pump outlet diameter (inch)
CR: Company code, means produced by CREDO PUMP
L: Vertical mixed flow pump
T: Vertical mixed flow pump (impeller blades adjustable in operation)
K: Rotor can be pulled out
B: Rotor can not be pulled out
X: Outlet is under pump foundation
S: Outlet is above pump foundation
20: Rate head
A: Impeller after cutting.
Structure
*The pump is vertically installed with the inlet vertical downward and the outlet horizontal extending.
*The rotor parts have pull-out mode and non-pull-out mode. The impeller blades of type T pump can be adjustable in operation.
*The pump installation has two choices. One is single foundation: the pump and the motor are connected directly and mounted on one concrete foundation; the other is double foundation: the pump and the motor are mounted on separate concrete foundation.
*The seal usually uses packing seal.
*The intake sump of the pump can be wet pit or dry pit.
*The axial thrust of the pump is usually carried by the motor, but small pumps usually carried by the pump itself.
*The impeller of the pump is usually one stage and it can be designed to be multistage as requirements.
*The bearings of the pump can be rubber bearings or Thordon bearings, when the rubber bearings are used, the shaft protected by a set of shaft sleeves with pressure clear water for lubrication.
Material of main parts
Shaft:High-quality carbon steel.
Impeller:Cast iron / Cast steel / Stainless steel.
Other parts:Cast iron / welded steel plate.
Parts range
Pump, Motor, Foundation plate and Mounting resistant cushion.
Remind:
Please indicate the material of main parts in your inquiry or purchase contract. Any special requirement, please don't hesitate to contact us.