Character
Hydraulic top-drive, steadiness and reliability, mechanical stop, steel torsion bar to maintain synchronization, high precision
Motorized-adjusting device of back gauge and ram stroke, fine adjusting by hand wheel, numerical display
Travel limit protection, full machine guarding with safety inter-locker
Two cylinders controlling beams vertical moving
Mechanical torsion synchronization
Integration hydraulic system
Standard punches and dies
Hanging arm control panel
Foot pedal with emergency stop
This machine is high-efficiency and high-precision in bending sheet metal. Using different kinds of upper and lower dies can bend all kinds of work pieces. One slider travel makes a sheet bending and the complicated shape work piece may be achieved through bending many times. When fitted with relevant equipments, it can be used to punch holes.
5. Overall structure
5.1 Using UG (finite element) analysis, through computer aid design, with nice appearance.
5.2 The machine structure is welded with steel plate, with sufficient strength and rigidity. The
hydraulic drive prevents the machine from serious overload operation accidents caused by the change of sheet thickness or bad choice of lower die cavity. Additionally, this machine is also featured by the steadiness of work, convenience of operation, and reliable safety.
5.3 The mechanic block is equipped in the oil cylinder to ensure the fixing accuracy when the slider travels to the bottom dead point and so as to assure the consistency of bending angle in bulking production.
5.4 Using German technology to eliminate internal stress.
5.5 Entire frame using striking grit to get rid of rust and spout anticorrosive paint.
6. Working slider structure
6.1 The machine is equipped with hydraulic electric control, freely adjustable slider travels and inching, semi-automatic, automatic operating criterion convenient for module trial and adjustment.
6.2 .Up-move type bending design,pair oil cylinders working simultaneously, balanced operation\convenient\and safety.
6.3 With function of keeping pressure and delay time on lower dead spot, to assure the accuracy of work pieces.
6.4 Under the national standard conditions, the accuracy of bending angle can up to ±45´.(Reference standard JB/T22572-1999.)
6.5 With function of slow decline, operator can control work pieces better