Stainless steel pre-heated solar water heater, solar geyser

Pre-heated copper coil assistant tank solar heater

The pre-heated solar heater is a passive system, which relies on a natural principle- Thermosiphon. There is water in evacuated tubes and free to flow into tanks. When the water in tubes is heated by suns rays firstly, this makes water in the tubes lighter. Therefore the cold water in the tank move downwards and hotter water move upside into the tank. It is an open circuit since the air vent and the overflow pope is open to the air.

All the storage tanks are tested before leaving with tested pressure of 0.05MPa (0.5bar). But the operation pressure should be 0 MPa. The daily efficiency is over or equal to 50 % normally and 42% in winter. We welds the inner tank by high-frequency ring or argon arc techniques

solar water heater feature:

TJNP-LS solar geyser tech date:

1)Inner tank: SUS304-2B food grade stainless steel

2)Outer tank: steel with surface of plastic painted

3)Support: steel with surface of plastic painted

4)Vaccum tubes: 3-high vaccum tube

5)Capacity: 150L~360L

6)Apurtue area: 1.67~3.55

7)Reflect angle: 38/45/50

8)Inner tank thickness of 0.31~0.5mm

9)Tank diameter: 420/460/470mm

10)Heat preservation: 72hrs

11)Heat-pipe vaccum tube: 58mm×1.8m~2.1m×15pcs~36pcs

optional accessaries:

1. intall optional assisstant tank to favour the automatic filling of tank water

2. intellegent controller to display water temperature, water level, amount of water etc.

3. electronic heating : 1500W, 50HZ,220V / 1500W, 60HZ, 110V (for American area)

4. comined with copper coil inside the water tank, advantage as follow:

Advantages:

1. Instant hot water supply, short waiting time

2, water runs at a pressure of normal running water

3. No risk of corrosion or scale deposit

Contact Supplier