The mould base material is 1.2311.Available material is 1.1730 or 50C.
The mould cavity and core material is 1.2343 with hardness HRC58±2.Available material 1.2311,1.2738,1.2767 etc.
The mould life is 1,500,000shots.
The standard of mould is Hassco.Available with Hassco,Meusburger standard.
The material of guide and busher are bearing steel with hardness HRC60.The
ejector pin material is SKD61 with hardness HRC60.
The mould is working on 100grams(70T) injection and circle time is 12seconds.
The injection gate is tunnel gate and work with automatic.The part drop with free and the injection gate cut with automatic.
The plastic component is is used for automotive operation panel.
The cooling medium is water and cooling nut is Hassco cooling nut.
The
plastic component surface is high gloss polish and Available surface is EDM surface.
The
hot runner system is available for the
mould.The type
hot runner can be point nozzle,needle nozzle,open nozzle.