RF Coaxial Connectors f connector
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company, Other |
| Main Products: | Direct Broadcast Tuner Shileding, F Connector For Set Top Box, Stamping Parts For PCB, Rf Shielding Cans For Tuner, EMI Shielding Case For PCB |
Product Description
RF antenna socket shield
Shield material: tinplate
F (male) connector housings
Material: Zinc alloy
Even the head of IEC
Enclosure material: SPCC surface of tin/nickel plated
Terminal pin: Copper
Conductor: Heat plastic
Uses: Suitable for high-frequency electronic tuner, RF modulator, set-top boxes, TV cards and shielded signal transmission, the signal transmission medium
Surface treatment: nickel plating
Salt spray test: according to national standards GB / T2423.17-93 medium salt spray test standard (NSS), 5% of Nacl solution spray 12 hours, washed with water and left at room temperature, the test can be 12 hours
Life test: Under no-load conditions, the speed of operation of 20-30 times per minute 5,000 times
Insertion force: The force gauge (and standard plug) between the plug and the shrapnel measurements, IEC (female)
Insertion force: 10-60N, pull force: 10-30N, F screw head (male): 3-30N
Contact resistance: frequency = 1,000Hz, current <100 mA, voltage = 20mv contact resistance ≤30mΩ
Withstand voltage: Under Canadian DC500V (50HZ or 60HZ) condition between the terminals and the terminal shell, 1 min 0.5mA continuous measurements
Insulation resistance: between terminals and between terminals and frame plus DC250V conditions, for 1 minute measurement, 100m over Europe
Heat test: put 48 hours at 85 ± 2 ℃ environment, and then placed in a normal environment for testing after 30 minutes
Moisture test: 40 ± 2 ℃, humidity 90-95% environment for 48 hours, and then placed in a normal environment for testing after 30 minutes
Vibration resistance: Frequency: 10Hz-55Hz-10Hz sweep cycle, double amplitude: 1.5mm, on three mutually perpendicular axes, each axis 2h, 6h total vibration
Appearance: No significant damage, contact resistance ≤50mΩ
Insulation resistance ≥100MΩ, voltage: AC 500V, 0.5mA, 1min, no breakdown, no arc, insertion force 10N ~ 30N
High temperature cycling:
Under proper fitting condition: -10 ± 2 ℃; 30min to 85 ± 2 ℃ after one cycle, a total of 5 cycles
Under standard atmospheric conditions, the recovery after 1h test
Appearance: No significant damage, contact resistance ≤50mΩ
Insulation resistance ≥100MΩ, voltage: AC 500V, 0.5mA, 1min, no breakdown, no arc, insertion force 10N ~ 30N
.jpg)
