Sell injection closed-loop molding machine
Main parameters of 50T injection molding machine as below;
| Parameter | Unit | Parameter Value |
| Screw diameter | mm | 28 |
| Screw L/D ratio | L/D | 19 |
| Shot volumn (theoretical) | cm3 | 70 |
| Injection weight(PS) | g | 64 |
| Plasticizing capacity | g/s | 7.5 |
| Injection rate | g/s | 74 |
| Injection pressure | Mpa | 224 |
| Screw speed | rpm | 310 |
| Clamp force | KN | 500 |
| Open stroke | mm | 250 |
| Distance between tie bars (W*H) | mm | 290*270 |
| Max mould thickness | mm | 300 |
| Min mould thickness | mm | 100 |
| Ejector stroke | mm | 65 |
| Ejector force | KN | 20 |
| Ejector number | PC | 1 |
| Dia of mould location hole | mm | 100 |
| Max pump pressure | Mpa | 16 |
| Servo motor power | KW | 7.5 |
| Heating power | KW | 3.9 |
| Machine dimension(L*W*H) | m | 3.2*1.15*1.6 |
| Oil tank capacity | L | 115 |
| Machine weight | t | 1.9 |
New designed small injection moulding machine feature 1:It adopted world well known valves, and added 3 sets water regulation.
New designed small injection moulding machine feature 2: Closed-loop injection for precise control;
We shuangsheng plastic machinery respects staffs and values partnership of each customer, each cooperators, that why we can grow smoothly and steadily even the international ecomonic situation is not so optimistic.
The orgnization chart of our company, average working life of the staffs is 8 years.
